Abstract:The mechanical and physical properties of component surfaces are determined by the evolution of microstructures during high speed machining (HSM). In order to investigete the crystalline structure and formation mechanism of the highly perturbed surface layer, a novel characterization technique, precession electron diffraction (PED), is applied for quantitative characterization of the nano-scaled microstructures of machined surfaces, including phase distribution, grain size, character of grain boundary, grain orientation distribution and geometrical necessary dislocation (GND) density distribution. The deformation conditions of machined surface are used to analyze the evolution of microstructure under the effects of high strain-rate during machining process. Nano-crystalline structures are observed under high strain-rate deformation in the highly perturbed layer of machined surfaces. The calculation results based on crystal orientation information show that high GND density up to 106/m2 is generated and deformed nano-twins boundary is 14% of total grain boundary, which demonstrate that both dislocation slip and twinning contribute to the plastic deformation during HSM. Composite stress state and rapid heating of HSM surface produce large numbers of nanoscale β phase precipitations, which has critical pinning effects on dislocation and grain boundary movement, and will inhibit grains recovery and growth until nanoscale grains are formed. As high strain rate combined with precipitation of second phase particles is the main factor for nanoscale grains formation, HSM could be considered as an effective method to control the deformation conditions through selecting proper machining parameters in order to acquire component surface with nanocrystalline structure.

Microstrain and grain-size analysis from diffraction peak width and graphical derivation of high-pressure thermomechanics

A methodology for determining mechanical properties of nanomaterials at high pressure and temperature

Thermomechanics of nanocrystalline nickel under high pressure-temperature conditions.

Microstructure and flow stress of polycrystals and single crystals

High P–T Nano-Mechanics of Polycrystalline Nickel

A complete grain-level assessment of the stress-strain evolution and associated deformation response in polycrystalline alloys

HighP-TNano-Mechanics of Polycrystalline Nickel.

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Anisotropy of Yielding/Hardening and Micro-Inhomogeneity of Deforming/Rotating for A Polycrystalline Metal under Cyclic Tension Compression

Combined Texture and Microstructure Analysis of Deformed Crystals by High-Energy X-ray Diffraction

The Study on Microscopic Mechanical Property of Polycrystalline with SEM Moiré Method

Crystal Plasticity Modeling and Neutron Diffraction Measurements of a Magnesium AZ31B Plate: Effects of Plastic Anisotropy and Surrounding Grains

The Lattice Strain Ratio in Characterizing the Grain-to-grain Interaction Effect and Its Specific Insight on the Plastic Deformation of Polycrystalline Materials

Diffraction Microstrain in Nanocrystalline Solids under Load - Heterogeneous Medium Approach

Grain Refinement Mechanism under High Strain-Rate Deformation in Machined Surface During High Speed Machining Ti6Al4V

Recrystallization of bulk nanostructured magnesium alloy AZ31 after severe plastic deformation: an in situ diffraction study

Microstrain effect on thermal properties of nanocrystalline Cu

In-situ Analysis of Grain Rotation and Lattice Strain Within a Magnesium Polycrystal Based on Synchrotron Polychromatic X-ray Diffraction Technique: (I) Prior to Twin.

Study of Microstructural Grain and Geometric Size Effects on Plastic Heterogeneities at Grain-Level by Using Crystal Plasticity Modeling with High-Fidelity Representative Microstructures

An In Situ Study of the Role of Pressure on Fe Recrystallization and Grain Growth during Thermomechanical Processing

Coherent diffraction imaging of nanoscale strain evolution in a single crystal under high pressure