Abstract:Grain boundary (GB) strengthening of metallic materials faces limitations as grain sizes are reduced to the nanoscale, primarily due to the transition from the strengthening to the softening effects. Understanding the intrinsic mechanisms behind such pronounced transitions is essential for optimizing the mechanical properties of nanocrystalline (NC) alloys. In this work, the critical grain size responsible for this transition is determined for NC CoCrNi medium-entropy alloys using molecular dynamics simulation, and the underlying mechanisms concerning varying temperatures and strain rates are systematically investigated for the samples with the critical grain size. The transition from Hall-Petch (HP) strengthening to Inverse Hall-Petch (IHP) softening is established by decreasing the average grain sizes from 21 nm to 3 nm. The critical grain size for the current alloys is estimated to be 12 nm, and the underlying deformation mechanisms are illustrated as follows: In the IHP regime, GB-mediated deformation becomes dominant, leading to softening. Conversely, in the HP regime, dislocation slip dominates the deformation mode, contributing to strengthening. It is found that an increase in temperature from 77 K to 1100 K leads to a decrease in the average flow stress and Young's modulus. Meanwhile, the deformation mechanisms change from dislocation slip (77K-700K) to GB-mediated deformation (700 K-1100 K). Furthermore, the underlying mechanisms correlating to the critical strain rate are uncovered. It can be attributed to the shift in deformation mechanisms from dislocation slip at relatively low strain rate regimes (5 x 10(7) s(-1)-2 x 10(9) s(-1)) to dislocation drag at relatively high strain rate regimes (2 x 10(9) s(-1)-5 x 10(9) s(-1)). Our atomistic insights into the tensile response of NC CoCrNi may provide a crucial basis for designing superior properties to meet the growing demands of advanced engineering fields.

Ductile–brittle–ductile Transition in an Electrodeposited 13 Nanometer Grain Sized Ni–8.6wt.% Co Alloy

Refining Micron-Sized Grains to Nanoscale in Ni-Co Based Superalloy by Quasistatical Compressive Deformation at High Temperature

Effect of Microstructure Evolution on Micro/Nano‐Mechanical Property of Fe–Co–Ni Ternary Alloys Solidified under Microgravity Condition

High Strength and High Ductility of Electrodeposited Nanocrystalline Ni with A Broad Grain Size Distribution

Low Temperature Superplasticity of Nanocrystalline Electrodeposited Ni–Co Alloy

Stable Ductility of an Electrodeposited Nanocrystalline Ni–20 Wt.%fe Alloy in Tensile Plastic Deformation

Mechanical properties of nanocrystalline Ni-Co alloy with different microstructures

Mapping the Strain-Rate and Grain-Size Dependence of Deformation Behaviors in Nanocrystalline Face-Centered-cubic Ni and Ni-based Alloys

Improved Mechanical Property of Electrodeposited Nanocrystalline Nickel-Cobalt Alloy

Dendrite Growth Kinetics and Microstructure Evolution Mechanism of Ni2tial Intermetallic Compound Within Substantially Undercooled Liquid Ni64al19ti17 Alloy

High Strength Nanocrystalline Ni-Co Alloy with Enhanced Tensile Ductility

The Transition of Strain Rate Sensitivity Induced by Fe Solutes in Electrodeposited Nanocrystalline Ni–Fe Alloy

Strain Rate Sensitivity and Activation Volume of Electrodeposited Nanocrystalline Ni and Ni-Co Alloys

Dual-phase Nanocrystalline Ni–Co Alloy with High Strength and Enhanced Ductility

Shear deformation mechanical performance of Ni–Co alloy nanoplate by molecular dynamics simulation

Effect of Co Content and Temperature on Shear Mechanical Properties of Nano‐Polycrystalline Ni–Co Alloy

Brittle-To-Ductile Transition in Multiphase Nial Alloy

Effect of Grain Size, Temperature, and Tensile Strain Rate on Mechanical Response of CoCrNi Medium-Entropy Alloys

Superplasticity and Microstructure Evolution of Electrodeposited Nanocrystalline Nickel

Deformation Behavior, Microstructure Evolution, Phase Transformation and Plastic Instability Origin of Powder Metallurgy Al0.8Co0.5Cr1.5CuFeNi Alloy During High Temperature Deformation

Evolution of Microstructure and Mechanical Properties of Electroplated Nanocrystalline Ni–Co Coating During Heating