Abstract:The pursuit of strong and ductile synergy is a key objective in the development of metals and alloys. Medium entropy alloys (MEAs) have emerged as a highly promising structural material, with potential applications in high-speed trains, aerospace, and defense fields. This study systematically investigates the effect of annealing temperature on the mechanical properties of a CrCoNi based MEA, namely (CrCoNi) 97 Al 1 Ti 2 MEA. The (CrCoNi) 97 Al 1 Ti 2 MEA was fabricated by cold rolling reduction of 40% and subsequently annealed at 820 °C for 1 h to achieve a heterogeneous structure that exhibits an excellent combination of strength and plasticity. Scanning electron microscopy and transmission electron microscopy were used to characterize the samples before and after tensile deformation, and to reveal the underlying deformation mechanisms. The results show that annealing at 820 °C for 1 h introduces a large number of precipitation phases, which are not observed at other annealing temperatures. During plastic deformation, the fine recrystallized grains contribute to the good ductility of the (CrCoNi) 97 Al 1 Ti 2 MEA, while deformation twinning and dislocation densities enable it to maintain good strength. The precipitation phase formed by annealing at 820 °C also significantly improves the strength of the (CrCoNi) 97 Al 1 Ti 2 MEA. Overall, this study provides insights into the mechanical properties of (CrCoNi) 97 Al 1 Ti 2 MEA, and highlights the importance of annealing temperature in achieving an optimal combination of strength and plasticity. The findings of this study have important implications for the design and development of MEAs for various applications in structural engineering.

Microstructure and Tensile Properties of Al0.5CoCrCuFeNi Alloys Produced by Simple Rolling and Annealing

Reforming Nanostructured CuAg Alloy to Improve Ductility and Electrical Conductivity

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Annealing-induced multi-heterogeneous microstructure strengthening in FeCoCrNiMo 0.2 high-entropy alloys

Microstructural Evolution and Mechanical Properties of Al0.5CoCrFeNi High-Entropy Alloy after Cold Rolling and Annealing Treatments

Deformation and Annealing Behaviors of High-Entropy Alloy Al0.5cocrcufeni

Microstructure and Mechanical Properties Evolution of the Al, C-Containing CoCrFeNiMn-Type High-Entropy Alloy during Cold Rolling

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

Effect of Annealing Treatment on the Heterogeneous Microstructure and Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy

Microstructure evolution and mechanical properties of CoCrFeNiAl0.3 high entropy alloy produced by ball milling in combination with thermomechanical consolidation

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al0.1CoCrFeNi high-entropy alloys

Microstructural Evolution and Tensile Properties of Al0.3CoCrFeNi High-Entropy Alloy Associated with B2 Precipitates

Microstructure and Mechanical Property of As-Cast, -Homogenized, and -Deformed AlxCoCrFeNi (0≤x≤2) High-Entropy Alloys

Synergic Combination of Strength and Ductility through Both Grain Refinement and Precipitation in Al0.3CoCrNi Medium‐Entropy Alloy

Influence of annealing temperatures on the microstructure and deformation behavior of a CrCoNi based medium-entropy alloy

Microstructure and Texture Evolution of Al0.3CoCrFeNi High-Entropy Alloy After Cold Rolling Deformation

Simultaneous Strength-Ductility Enhancement of a Nano-Lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Cryo-Rolling and Annealing

Effect of partial recrystallization on microstructure and tensile properties of NiFeCoCrMn high-entropy alloy

Microstructure Evolution and Microhardness of AlxNi2−xCoCrFe Alloys After Long-Time Annealing

Effect of Annealing Temperature on the Microstructure and Mechanical Properties of CoCrFeNiNb0.2Mo0.2 High Entropy Alloy