Abstract:The microstructure and properties of cobalt-free cost-effective AlCrFe2Ni2 high entropy alloy (HEA) in the as-cast condition and after thermo-mechanical processing by severe cold-rolling and annealing were investigated in the present work. The as-cast HEA showed a heterogeneous microstructure consisting of relatively coarse lamellar and much finer intertwined regions. The coarse regions consisted of eutectic mixture of FCC and ordered B2 (along with minor BCC) phases. The FCC phase was enriched in Fe and Cr, while the B2 phase was found enriched in Ni and Al but depleted in Cr. The BCC/B2 phase in the as-cast material showed phase separation due to spinodal decomposition to two different B2 phases in the fine regions. The overall FCC phase and BCC/B2 phase fractions were ∼60% and 40%, respectively. Despite the complex microstructure, the presence of a high fraction of the ductile FCC phase rendered remarkable workability, allowing heavy cold-rolling up to 90% reduction in thickness. Heavy deformation resulted in the development of intriguing microstructural features such as folding and bending of the lamellae, local shearing, and finally, deformation-induced nanocrystallization of the FCC phase. However, the B2 phase retained the ordered structure even after 90% cold-rolling. Annealing at 800 °C resulted in the formation of an ultrafine microduplex structure with significant resistance to grain growth even up to an annealing temperature of 1200 °C. A high yield (∼880 MPa) and tensile strength (̴ 1100 MPa) coupled with appreciable elongation (∼10%) could be achieved after annealing at 800 °C. The tensile properties obtained were superior to the other cobalt-free HEAs, which indicate the promising application of the cobalt-free cost-effective AlCrFe2Ni2 HEA as an advanced structural material.

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Effect of cold working and annealing on microstructure and properties of powder metallurgy high entropy alloy

Improving Mechanical Properties of Fe-Mn-Co-Cr High-Entropy Alloy via Annealing after Cold Rolling

Effect of Annealing on Microstructure Evolution and Tensile Behavior of Hot-Rolled FeMnCoCrAl High-Entropy Alloy

Effect of Annealing Treatment on the Heterogeneous Microstructure and Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy

Microstructural Evolution and Tensile Properties of Al0.3CoCrFeNi High-Entropy Alloy Associated with B2 Precipitates

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment

Effects of cold rolling and annealing treatment on microstructure and properties of CoFeNiMnV high‐entropy alloys

Achieving superior strength-ductility balance of Co–Cr–Fe–Ni high entropy alloy via annealing

Microstructure Evolution and Tensile Property of a CuMnFeCoNi High-Entropy Alloy During Thermomechanical Treatment

Influence of Annealing Treatment on the Microstructure and Mechanical Properties of Cold-Sprayed CoCrFeNiMn High Entropy Alloy

Tailoring Mechanical and Electrochemical Properties of the Cr15Fe20Co35Ni20Mo10 High-Entropy Alloy via the Competition between Recrystallization and Precipitation Processes

Influence of annealing temperatures on the microstructure and deformation behavior of a CrCoNi based medium-entropy alloy

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

Heterogeneous Microstructure and Tensile Properties of Fe50Mn30Co10Cr10 Metastable High-Entropy Alloy

Effect of Heat Treatment on the Microstructure and Mechanical Properties of the Al0.6CoCrFeNi High-Entropy Alloy

Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al0.1CoCrFeNi high-entropy alloys

Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing