Abstract:An ultrafine-structured FeCoCrNiMn high-entropy alloy (HEA) was produced by severe cold rolling (SCR) with a 95 pct reduction, and the effect of annealing temperature over a wide range from 573 K to 1373 K (300 °C to 1100 °C) on the microstructure and mechanical properties of this SCRed HEA was systematically investigated. The results show that the microstructure of the single-phase FCC HEA after SCR is greatly refined and mainly comprises ultrafine crystalline, high-density dislocation cell and networks, which substantially improve the hardness and strength. The SCRed HEA starts to recrystallize at an annealing temperature of 773 K (500 °C) and is fully recrystallized at 973 K (700 °C) after 1 hours. The σ phases with a tetragonal structure form upon annealing at 773 K (500 °C), leading to a further enhancement in hardness and strength for the annealed HEA compared to the SCRed HEA. The average grain size remains below 500 nm when the SCRed HEA is annealed at 923 K (650 °C) for 1 hours, indicating that the ultrafine-structured HEA after SCR and subsequent annealing treatment possesses excellent microstructural thermal stability. The SCRed HEAs annealed at 923 K and 973 K (650 °C and 700 °C) exhibit excellent high strength–ductility combinations due to the formation of the fully recrystallized ultrafine-grained microstructure. The strain-rate sensitivity parameter (m value) with different grain sizes, from ultrafine to coarse, was evaluated by strain-rate jump tests. The m value of the HEA increases monotonically with increasing grain size and annealing temperature. Moreover, high-temperature tensile tests demonstrated that the annealed HEAs exhibit superplastic deformation behavior at 973 K and 1073 K (700 °C and 800 °C), and the formation of a Cr-rich phase is found during high-temperature deformation. It is believed that the plastic deformation facilitates the phase decomposition of fine-grained HEAs and grain boundary sliding is the key mechanism of high-temperature deformation.

Effects of cold rolling and annealing treatment on microstructure and properties of CoFeNiMnV high‐entropy alloys

Effect of Annealing Treatment on the Heterogeneous Microstructure and Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy

Microstructure and Properties of Bulk Al0.5CoCrFeNi High-Entropy Alloy by Cold Rolling and Subsequent Annealing

Effect of Annealing Treatments on Microstructure, Tensile and Wear Properties of Cold-Rolled FeCoCrNiMn High Entropy Alloy

Microstructure and properties of bulk Al 0.5 CoCrFeNi high-entropy alloy by cold rolling and subsequent annealing

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Effect of Cold Rolling on Microstructure and Mechanical Property of a Novel (fe50mn30co10cr10)97c2mo1 High Entropy Alloy

Effect of cold working and annealing on microstructure and properties of powder metallurgy high entropy alloy

Improving Mechanical Properties of Fe-Mn-Co-Cr High-Entropy Alloy via Annealing after Cold Rolling

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

Mechanical Behaviors of Cold-Rolled and Subsequently Annealed Fe35Ni35Cr20Mn10 High-Entropy Alloy

Effect of Annealing on Microstructure Evolution and Tensile Behavior of Hot-Rolled FeMnCoCrAl High-Entropy Alloy

Effects of Warm-Rolling and Annealing on the Microstructure and Mechanical Properties of Dual-Phase Al0.45CoCrFeNiTi0.25 High-Entropy Alloy

Effect of Annealing Temperature on Microstructure and Mechanical Properties of a Severe Cold-Rolled FeCoCrNiMn High-Entropy Alloy

Investigation on Microstructure, Superior Tensile Property and Its Mechanism in Al0.3CoCrFeNi High-Entropy Alloy Via Thermo-Mechanical Processing

Microstructures and Mechanical Properties of a CoCrFeNiMn High-Entropy Alloy Obtained by 223 K Cryorolling and Subsequent Annealing

Enhanced strength and slightly reduced ductility in a high entropy alloy via cold rolling and annealing

Effect of Recrystallization Annealing on Microstructure and Properties of Cold-Deformed CoCrCu1.2FeNi High Entropy Alloy

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

Effects of Annealing on Microstructure and Mechanical Properties of Metastable Powder Metallurgy CoCrFeNiMo0.2 High Entropy Alloy.

Effect of Annealing on Microstructure and Mechanical Properties of an Ultrafine-Structured Al-containing FeCoCrNiMn High-Entropy Alloy Produced by Severe Cold Rolling