Abstract:The effect of severe warm-rolling on the microstructure and texture development in FCC equiatomic CoCrFeMnNi HEA was investigated in the present work. For this purpose, the HEA was warm-rolled to 90% reduction in thickness at 600 °C and annealed for 1 h at temperatures up to 1200 °C. To highlight the effect of warm-rolling, a critical comparison was made with similarly deformed and annealed cold-rolled HEA. The warm-rolled HEA showed an ultrafine lamellar microstructure, which was, however, significantly coarser than the cold-rolled HEA. The significantly coarser microstructure in the warm-rolled HEA could be attributed to the dynamic annihilation of dislocations during deformation. Warm-rolled HEA showed a pure metal or copper type texture instead of a predominantly brass type texture in the cold-rolled HEA. The stark differences in the deformation texture could be attributed to the increase in the SFE at the temperature of warm-rolling, which promoted more homogeneous deformation by dislocation slip over twin mediated deformation and extensive shear band formation. The lower stored energy and coarser deformation structure of the warm-rolled HEA resulted in higher recrystallization temperature, and consistently larger recrystallized grain size than the cold-rolled HEA. Annealing also resulted in the weakening of the recrystallization texture owing to the absence of strong preferential nucleation or growth. The HEA warm-rolled and annealed at 750 °C resulted in a fine-grained, completely recrystallized microstructure with the optimum strength-ductility combination. The present results revealed that warm-rolling could be effectively used as a processing route for tailoring microstructure and properties of CoCrFeMnNi HEA.

Effect of annealing temperature on anisotropy of mechanical properties in powder metallurgy FeCoCrNiN0.07 high-entropy alloy sheets

Effect of Annealing Treatment on the Heterogeneous Microstructure and Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy

Static recrystallization and texture evolution of cold-rolled powder metallurgy CoCrFeNiN0.07 high-entropy alloy

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

Effects of cold rolling and annealing treatment on microstructure and properties of CoFeNiMnV high‐entropy alloys

Effect of cold working and annealing on microstructure and properties of powder metallurgy high entropy alloy

Improving Mechanical Properties of Fe-Mn-Co-Cr High-Entropy Alloy via Annealing after Cold Rolling

Effect of Annealing on Microstructure Evolution and Tensile Behavior of Hot-Rolled FeMnCoCrAl High-Entropy Alloy

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al0.1CoCrFeNi high-entropy alloys

Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment

Effect of Annealing on the Microstructure, Texture, and Properties of Cold-Rolled Ti50Ni47Fe3 Shape Memory Alloy Sheets

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

Effect of annealing temperature on the structure and properties of FeCoCrNiMo high-entropy alloy

Microstructural Evolution and Mechanical Properties of Al0.5CoCrFeNi High-Entropy Alloy after Cold Rolling and Annealing Treatments

Influence of Annealing Treatment on the Microstructure and Mechanical Properties of Cold-Sprayed CoCrFeNiMn High Entropy Alloy

Microstructures and properties of Fe1.25CoNi1.25CrxAl0.25 high-entropy alloys after cold-rolling and annealing

Severe warm-rolling mediated microstructure and texture of equiatomic CoCrFeMnNi high entropy alloy: A comparison with cold-rolling

Effect of Annealing Temperature on the Microstructure and Mechanical Properties of CoCrFeNiNb0.2Mo0.2 High Entropy Alloy

Evolution of Microstructure and Crystallographic Texture in Severely Cold Rolled High Entropy Equiatomic CoCrFeMnNi Alloy During Annealing

The Dependence of Final Microstructure, Texture Evolution and Mechanical Properties of Al–Mg–Si–Cu Alloy Sheets on the Intermediate Annealing