Abstract:The study of alloys exhibiting noteworthy strength-ductility synergy at ambient and cryogenic temperatures has been a persistent area of interest in materials engineering. This interest extends to the recent development of high-entropy alloys (HEAs). The current investigation delves into the impact of diverse thermo-mechanical treatments on the phase and microstructure evolution in a face-centered cubic (FCC) Al7.5Co20.5Fe24Ni24Cr24 HEA. The transition from solid-solution annealing to recrystallization annealing leads to the formation of the desired hierarchical B2+L12+ σ precipitates, accompanied by a heterogeneous FCC matrix. The initiation of the B2 phase originates from nucleation on defect-rich sites, such as deformation bands. However, the coherent L12 phase homogeneously forms in the FCC matrix at intermediate temperature aging, as these sites are scarce or occupied. A heterogeneous structure emerges from the transition in annealing temperatures and the pinning effect of the B2 precipitates. The resulting heterogeneous structure exhibits an exceptional strength-ductility synergy at both room and liquid nitrogen (LN2) temperatures. This is evident in its mechanical properties with a yield strength of ∼717 MPa / ∼1109 MPa, an ultimate tensile strength of ∼1086 MPa / ∼1609 MPa, and an elongation of ∼34.3 % / ∼43.2 % at room / LN2 temperatures. The formation of deformation twins (DTs) is facilitated by localized stress buildup from hetero-deformation-induced (HDI) hardening stress at room temperature. The exceptional strength and ductility at LN2 temperature are attributed to a combination of factors. These include a high-density of stacking faults (SFs), DTs, and their interactions, including those with precipitates, SFs-based substructures, and Lomer-Cottrell locks. These multiple deformation mechanisms ensure consistent and sustained strain-hardening even under substantial strain. This paper sheds light on the complex interplay of microstructure, deformation mechanisms, and mechanical properties in the Al7.5Co20.5Fe24Ni24Cr24 HEA, potentially guiding the development of ultra-strong yet ductile alloys for cryogenic applications.

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Enhanced Strength and Ductility of Bulk CoCrFeMnNi High Entropy Alloy Having Fully Recrystallized Ultrafine-Grained Structure

Exceptional strength-ductility synergy at room and liquid nitrogen temperatures of Al7.5Co20.5Fe24Ni24Cr24 high-entropy alloy with hierarchical precipitate heterogeneous structure

Strong and ductile CoCrFeNi high-entropy alloy microfibers at ambient and cryogenic temperatures

Excellent Strength-Ductility Combination of Cr26Mn20Fe20CO20Ni14 High-Entropy Alloy at Cryogenic Temperatures

Microstructural Origins for a Strong and Ductile Al0.1CoCrFeNi High-Entropy Alloy with Ultrafine Grains

Yield strength-ductility trade-off breakthrough in Co-free Fe40Mn10Cr25Ni25 high-entropy alloys with partial recrystallization

Remarkable Strength of a Non-Equiatomic Co29Cr29Fe29Ni12.5W0.5 High-Entropy Alloy at Cryogenic Temperatures

Achieving ultra-high strength in a face-centered-cubic FeCrCoNi high entropy alloy through dense nanotwins bundles structure prepared by cryo-rolling

Ultrafine-grained Dual Phase Al0.45CoCrFeNi High-Entropy Alloys

Achieving excellent strength-ductility synergy via high density dislocation and nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloy

Synergy Effect of Multi-Strengthening Mechanisms in FeMnCoCrN HEA at Cryogenic Temperature

Achieving Superior Combined Cryogenic Strength and Ductility in a High-Entropy Alloy Via the Synergy of Low Stacking Fault Energy and Multiscale Heterostructure

Ductile CoCrFeNiMox High Entropy Alloys Strengthened by Hard Intermetallic Phases

Microstructure of and mechanical properties of an as-cast fine-grain dual-phase Fe-based high entropy alloy formed via solid-state phase transformation

Cryogenic Mechanical Behaviors of CrMnFeCoNi High-Entropy Alloy

Ultra-high Strength Assisted by Nano-Precipitates in a Heterostructural High-Entropy Alloy

Strength-ductility Synergy of Al0.3CoCrFeNiCu High-Entropy Alloy Via Cold Rolling and Subsequent Annealing

Hierarchical Microstructure Enables High Strength and Good Ductility in As-Cast Fe27Ni35Cr18.25Al13.75Co2Ti2Mo2 High-Entropy Alloy

Temperature-dependent tensile properties of ultrafine-grained C-doped CoCrFeMnNi high-entropy alloy

Good Strength-Ductility Synergy Achieved in a Fe62Ni16Co9Mn9Ti3Si1 Fe-high-entropy Alloy with Heterogeneous Structures