Abstract:The mechanical characteristics of polycrystalline metallic materials are influenced significantly by various microstructural parameters, one of which is the grain size. Specifically, the strength and the toughness of polycrystalline metals exhibit enhancement as the grain size is reduced. Applying severe plastic deformations (SPDs) has a noticeable result in obtaining metallic materials with ultrafine-grained (UFG) microstructure. SPD, executed through conventional shaping methods like extrusion, plays a pivotal role in the evolution of the texture, which is closely related to the plastic behavior and ductility. A number of SPD processes have been developed to generate ultrafine-grained materials, each having a different shear deformation mechanism. Among these methods, linear twist extrusion (LTE) presents a non-uniform and non-monotonic form of severe plastic deformation, leading to significant shifts in the microstructure. Prior research demonstrates the capability of the LTE process to yield consistent, weak textures in pre-textured copper. However, limitations in production efficiency and the uneven distribution of grain refinement have curbed the widespread use of LTE in industrial settings. This has facilitated the development of an improved novel method, that surpasses the traditional approach, known as the nonlinear twist extrusion procedure (NLTE). The NLTE method innovatively adjusts the channel design of the mold within the twist section to mitigate strain reversal and the rotational movement of the workpiece, both of which have been identified as shortcomings of twist extrusion. Accurate anticipation of texture changes in SPD processes is essential for mold design and process parameter optimization. The performance of the proposed extrusion technique should still be studied. In this context, here, a single crystal (SC) of copper in billet form, passing through both LTE and NLTE, is analyzed, employing a rate-dependent crystal plasticity finite element (CPFE) framework. CPFE simulations were performed for both LTE and NLTE of SC copper specimens having <100> or <111> directions parallel to the extrusion direction initially. The texture evolution as well as the cross-sectional distribution of the stress and strain is studied in detail, and the performance of both processes is compared.

Numerical and Experimental Studies of Pure Copper Processed by a New Severe Plastic Deformation Method

Effect of cryogenic impact deformation and subsequent annealing on microstructure and microhardness of pure copper

Tensile Deformation Behaviors of CuNi Alloy Processed by Equal Channel Angular Pressing

Tensile and Compressive Deformation Behaviors of Commercially Pure Al Processed by Equal-Channel Angular Pressing with Different Dies

Effect of Cerium on Microstructure, Texture and Properties of Ultrahigh-Purity Copper

Severe plastic deformation of commercially pure aluminum using novel equal channel angular expansion extrusion with spherical cavity

Effect of grain refinement on mechanical and electrochemical properties of severely deformed pure copper through equal channel angular pressing

Strain localization and ductile fracture mechanism of micro/mesoscale deformation in ultrafine-grained pure copper

1216 Nano-Scale Strength Analysis by EBSD and AFM Hybrid Method in Ultrafine-Grained Copper Processed by ECAP

High strength high conductivity copper prepared by C-ECAP and Cryo-rolling

Study on Optimization of Parameters Affecting Simple Shear Extrusion of Pure Copper to Fabricate Fine Grain Structure

Microstructure and Texture of Pure Copper under Large Compression Deformation and Different Annealing Times

Deformation Behavior and Microstructural Evolution of T-Shape Upsetting Test in Ultrafine-Grained Pure Copper

Experimental and Numerical Investigation of the ECAP Processed Copper: Microstructural Evolution, Crystallographic Texture and Hardness Homogeneity

EBSD Analysis of Deformed and Partially Recrystallized Microstructures in ECAE-Processed Copper

Strain effects on the wear rate of severely deformed copper

Experimental study and Finite Element Modelling of Pure Copper Tube Fabrication via the Parallel Tubular Channel Angular Pressing (PTCAP) Process

Effect of Hard Cyclic Viscoplastic Deformation on the Microstructure, Mechanical Properties, and Electrical Conductivity of Cu-Cr Alloy

Investigation of the stress-strain state and microstructure transformation of copper busbars in the deformation zone during continuous extrusion

Comparison of Linear and Nonlinear Twist Extrusion Processes with Crystal Plasticity Finite Element Analysis

Impurity effect on recrystallization and grain growth in severe plastically deformed copper