Abstract:Shear localizations with different strains in annealed copper were obtained by a modified split Hopkinson pressure bar. Microstructure and microtexture evolution of the shear localization regions were examined using optical microscopy, electron backscatter diffraction technique, and transmission electron microscopy. The results show that both the mechanical response and deformation behavior are correlated closely to the shear strains. The elongated dislocation cells, stretched subgrains, and the refinement of subgrains are observed within shear localizations during dynamic deformation. Ultrafine grains of 100 to 300 nm with high-angle-boundaries are produced within the shear band with the shear strain of 5.8. Microtexture characterization reveals that a stable orientation, in which 〈110〉 directions of the crystals tend to align with the shear direction, develops both in the deformation and recrystallization areas. The {111} planes of the crystals tend to parallel to the shear plane in the deformation area, whereas the aggregated extent of this orientation becomes weak in the recrystallization area. In addition, some grains exist with the {100} planes parallel to the shear plane in the deformation and recrystallization areas. The rotational dynamic recrystallization is a reasonable mechanism for the microstructure evolution. The effects of cooling stage on the growth of grains and the change of dislocation density are estimated as a complementarity to this mechanism.

Strain localization and ductile fracture mechanism of micro/mesoscale deformation in ultrafine-grained pure copper

Strain Softening Mechanism at Meso Scale During Micro-Compression in an Ultrafine-Grained Pure Copper

Numerical investigation of fracture behavior of nanostructured Cu with bimodal grain size distribution

Experimental and numerical study on the micro-forming of copper multi-crystal

Shear fracture mechanism in micro-tension of an ultrafine-grained pure copper using synchrotron radiation X-ray tomography

Deformation Behavior and Microstructural Evolution of T-Shape Upsetting Test in Ultrafine-Grained Pure Copper

Effect of Crystalline Anisotropy and Forming Conditions on Thinning and Rupturing in Deep Drawing of Copper Single Crystal

Tensile Ductility of Ultra-Fine Grained Copper at High Strain Rate

Simultaneous Grain Growth and Grain Refinement in Bulk Ultrafine-Grained Copper under Tensile Deformation at Room Temperature

1216 Nano-Scale Strength Analysis by EBSD and AFM Hybrid Method in Ultrafine-Grained Copper Processed by ECAP

Strain Rate Dependence of Tensile Strength and Ductility of Nano and Ultrafine Grained Coppers

Microstructural Evolution and Micro/Meso-Deformation Behavior in Pure Copper Processed by Equal-Channel Angular Pressing

Deformation Behaviour of Ultra-Fine-grained Copper

Fatigue Property and Fatigue Cracks of Ultra-Fine Grained Copper Processed by Equal-Channel Angular Pressing

Size Effect on Deformation Behavior and Ductile Fracture in Microforming of Pure Copper Sheets Considering Free Surface Roughening

Microstructure and Microtexture Evolution of Shear Localization in Dynamic Deformation with Different Strains in Annealed Copper

FEM simulations of tensile deformation and fracture analysis for CuW alloys at mesoscopic level

Mechanisms Of Cyclic Plastic Deformation In Ultrafine-Grain Copper Produced By Severe Plastic Deformation

Experimental Study on Pure Copper Subjected to Different Severe Plastic Deformation Modes

Temperature And Strain Rate Sensitivity Of Ultrafine-Grained Copper Under Uniaxial Compression

Microstructural Evolution and Micro‐Compression in High‐Purity Copper Processed by High‐Pressure Torsion