Abstract:Introduction: During severe plastic deformation (SPD) processing, aluminum alloys exhibit moderate strength and ductility. Nevertheless, the materials' ductility, as determined by tensile testing, does not accurately represent their capacity for plastic deformation. After the tensile test, its material, aluminum alloy 5083, was observed to be super ductile. Method: The results of a more thorough plasticity analysis—applied for the first time to material following SPD processing—are presented in this paper. The aluminum alloy 5083 is examined in the patent both before and after equal channel angular pressing (ECAP). A highly effective aluminum alloy 5083 specimen preparation was suggested. Under heated temperatures, the process involves severe plastic deformation. Optical microscopy and scanning electron microscopy (SEM) were used for micro-structural research in order to look at the distribution of second-phase particles and the evolution of grain structure. Furthermore, Vickers micro-hardness testing was utilized to assess the mechanical characteristics of the alloy after processing. The outcomes showed that after ECAP processing, there was a significant decrease in grain size and an increase in micro-hardness. Result: Additionally, the production of a finer microstructure with a more uniform distribution of strengthening precipitates was clarified by electron microscopy (SEM). The micro-structural evolution and mechanical behavior of aluminum alloy 5083 under ECAP are well-explained in this patent, which may lead to improved performance in structural applications. This method can be used to forecast fractures in plastic deformation processes and estimate the final plasticity of the materials for various stress-strain states after ECAP processing, as well as the mechanical properties discussed. Conclusion: Due to its unique mechanical qualities, aluminum alloy 5083 shows great potential in a variety of structural applications. The effects of Equal Channel Angular Pressing (ECAP) on the hardness and microstructure of aluminum alloy 5083 were examined in this patent work. result: The specimen's mechanical characteristics are at their finest following a single deformation when the temperature reaches 300°C. Compared to the original specimen, the tensile strength observed enhanced after the fourth pass, and breaking elongation (28.3%) was improved. Through second-phase strengthening and fine-tuning, the recrystallized grains and second-phase particles increase the material's strength.

Tensile and Compressive Deformation Behaviors of Commercially Pure Al Processed by Equal-Channel Angular Pressing with Different Dies

Tensile Deformation Behaviors of CuNi Alloy Processed by Equal Channel Angular Pressing

Ebsp Investigation of Microstructure and Texture Evolution During Equal Channel Angular Pressing of Aluminium

Influence of Equal Channel Angular Pressing and Cyclic Extrusion Compression on the Microstructure Evolution and Mechanical Properties of Pure Aluminum

Investigating the Influence of Thermomechanical Equal Channel Angular Pressing (ECAP) Improved Die on AA-6061

EBSP Study of the Annealing Behavior of Aluminum Deformed by Equal Channel Angular Processing

Microstructural evolution and mechanical properties of AZ31 Mg alloy fabricated by a novel bifurcation-equal channel angular pressing

Effect of equal channel angular extrusion process on deformation behaviors of Mg-3Al-Zn alloy

A Comparative Analysis of the Stored Energy in Shear-Oriented Grains and Mechanical Properties in Two Al-Mg-Si Alloys Processed by Equal-Channel Angular Processing

Corrosion Behavior of Commercial Aluminum Alloy Processed by Equal Channel Angular Pressing

Finite Element Simulation and Experimental Investigation of Hot Forming Cold Die Quenching and Equal Channel Angular Pressing of AA2024 Aluminum Alloy

Reducing the Tension–compression Yield Asymmetry of Extruded Mg–Zn–Ca Alloy Via Equal Channel Angular Pressing

Annealing Behavior of Aluminium Deformed by Equal Channel Angular Pressing

Electron Backscatter Diffraction Investigation on Microstructure Evolution of TiB2(p)/Al-Cu Composite after Single-Pass Equal Channel Angular Pressing for Formability Assessment

Influence of equal channel angular pressing in an acute angle die with a back pressure notch on grain refinement, torsion and mechanical properties of aluminium

Mechanical responses, texture and microstructural evolution of high purity aluminum deformed by equal channel angular pressing

Study on equal channel angular pressing process of Mg–Zn–Y–Mn–Ti magnesium alloy enhanced by lamellar LPSO phase and spherical W phase

Influence of ECAP as grain refinement technique on microstructure evolution, mechanical properties and corrosion behavior of pure aluminum

Influence of Equal Channel Angular Pressing Technique on Mechanical Properties, Corrosion Resistance, and Microstructural Behavior of Al-Alloy 5083

Tailoring Deformation Homogeneity of WE43 Alloy through Strain Rate Sensitivity and Back Pressure during Equal Channel Angular Pressing

Development of mechanical properties and microstructure for Al–Zn–Mg–Cu alloys through ECAP after optimizing the outer corner angles through FE modeling