Abstract:This article reports a novel laser-induced micro-fabrication method and its monitoring system for three-dimensional (3D) microstructures. The mechanism of the method is that a small zone of thermoplastic material melted by laser heating grows in liquid surrounding environment, solidifying into a convex microstructure, such as micro-dot or micro-pillar. A laser diode (808 nm) with maximum power output of 130 mW is used as power source, and a kind of paraffin mixed with stearic acid and paint serves as the thermoplastic material for 3D microstructure formation experiments. A light microscope system consisting of a charge-coupled device (CCD) and a computer is utilized to realize real-time observation of the micro-fabricating process. The distribution of local temperature rise on material surface created by laser irradiation is simulated. The effects of liquid environment on microstructure formation have been theoretically analyzed and experimentally studied. Experiments are further carried out to investigate the relationship between laser spot and fabricated microstructures. The results indicate that the widths of microdots or micro-pillars are mostly determined by the size of focal spot, and their heights increase with the enlargement of laser power density. With this method, a micro-dot array of Chinese characters meaning "China" has been successfully fabricated through computer programming. This method has the advantages of implementing direct, mask-less, real-time and inexpensive 3D microstructure fabrication. Therefore, it would be widely applied in the fields of micro/nano-technology for practical fabrication of different kinds of 3D microstructures. Microsc. Res. Tech. 72:717-722, 2009. (C) 2009 Wiley-Liss, Inc.

A Fast and Efficient Fabrication Method for Microlens Array by Using Picosecond Laser Induced Volume Swelling

Transmission of refractive microlens array by reactive ion beam etching

In Situ Fabrication of a Tunable Microlens.

Rapid fabrication of large-area concave microlens arrays on PDMS by a femtosecond laser

Fabrication of microstructures by picosecond laser

Progress In Femtosecond Laser Fabrication Of Microlens Array With Spatial Light Modulators

One-step Fabrication of Achromatic Spherical Microlens Array on Enzyme Etched Gelatin Film

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Fabrication of large-area microwells on Polydimethylsiloxane films by femtosecond laser ablation

Direct write of microlens array using digital projection photopolymerization

Fabrication of Large-Area Silicon Spherical Microlens Arrays by Thermal Reflow and ICP Etching

Rapid Fabrication of Large-Area Concave Microlens Array on ZnSe

Optical Nanofabrication of Concave Microlens Arrays

Rapid Fabrication Of Continuous Surface Fresnel Microlens Array By Femtosecond Laser Focal Field Engineering

Convex Silica Microlens Arrays Via Femtosecond Laser Writing.

Soft Mold of Microlens Arrays Fabricated by Surface Self-Assembly

An Ultraviolet-Lithography-Assisted Sintering Method for Glass Microlens Array Fabrication

Concave Microlens Array Mold Fabrication in Photoresist Using UV Proximity Printing

Morphology adjustable microlens array fabricated by single spatially modulated femtosecond pulse

Rapid fabrication of quasi-periodic aspherical concave microlens array with different focal lengths on fused silica by shaping picosecond laser-induced multi-step wet-etching for multi-layer optical imaging

Using Micromachined Molds, Partial-curing PDMS Bonding Technique, and Multiple Casting to Create Hybrid Microfluidic Chip for Microlens Array