Abstract:It's a critical issue for the successful commercialization of solid oxide fuel cells (SOFCs) to achieve long-term operation and thermal cycling stability without significant degradation. Current work reports an almost-dense, sintering-active and Sr-blocking cathode/electrolyte interface, fabricated through a cost-competitive and scalable method of modifying porous Gadolinia doped Ceria (GDC) barrier layer by in-situ grown GDC nanoparticles. Result show that the robust interface enables improved durability and thermal cycling stability. The hydrothermal modified anode supported cell performance only deteriorates by -0.5% after 20 times thermal cycles between 200 and 750 & DEG;C, which is more prominent enhancement than -16% for pristine cell. The modified symmetric cell shows smaller cathode polarization resistance and well-attached cathode/electrolyte interfaces after -1200 h of operation, including 4 times thermal cycles. While the pristine cell shows more obvious area specific resistances increases and the peeled-off cathode layer. It is discussed and concluded that the hydrothermal modified sintering-active barrier layer has contributed mainly to the construction of robust cathode/electrolyte interface, yielding the improved performance and prolonged operation.& COPY; 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Improvement of Cathode Support Tubular Solid Oxide Fuel Cells

Effect of Cathode Fabrication Method on Characteristics of Anode-Supported Tubular Solid Oxide Fuel Cells

Tailoring the Pore Structure of Cathode Supports for Improving the Electrochemical Performance of Solid Oxide Fuel Cells

Preparation and Performance of Nanostructured Porous Thin Cathode for Low-Temperature Solid Oxide Fuel Cells by Spin-Coating Method

Improvement of the Performances of Tubular Solid Oxide Fuel Cells by Optimizing Co-Sintering Temperature of the NiO/YSZ Anode-Ysz Electrolyte Double Layers

Fabrication of composite cathode by a new process for anode-supported tubular solid oxide fuel cells

High Performance Anode-Supported Tubular Solid Oxide Fuel Cells Fabricated by a Novel Slurry-Casting Method

Preparation and performance of a nano-honeycomb cathode for microtubular solid oxide fuel cells

Microstructure and electrochemical characterization of solid oxide fuel cells fabricated by co-tape casting

Fabrication and Characterization of a Cathode-Support Solid Oxide Fuel Cell by Tape Casting and Lamination

Improvement of Cathode–electrolyte Interfaces of Tubular Solid Oxide Fuel Cells by Fabricating Dense YSZ Electrolyte Membranes with Indented Surfaces

Comparative study on the performance of tubular solid oxide fuel cells with various Pr0.35Nd0.35Sr0.3MnO3/YSZ cathode layers made by different processes

Comparative Study of Solid Oxide Fuel Cells Supported on Ceramic Cathodes with Different Pore Structures

Fabrication and Properties of Anode-Supported Solid Oxide Fuel Cell

Enhancement of the Cathode/electrolyte Interface by a Sintering-Active Barrier Layer for Solid Oxide Fuel Cells

Improvement of Anode-Supported Solid Oxide Fuel Cells

Developing an ultrafine Ba0.5Sr0.5Co0.8Fe0.2O3-δ cathode for efficient solid oxide fuel cells

Effect of Characteristics of (Sm,ce)o-2 Powder on the Fabrication and Performance of Anode-Supported Solid Oxide Fuel Cells

Fabrication and Electrochemical Characterization of Anode-Supported Microtubular Solid Oxide Fuel Cells Based on Ce0.8sm0.2o2-D Electrolytes

Optimization of Cathode Structure for Anode Supported Planar Solid Oxide Fuel Cell

Preparation and Characteristics of Anode-Supported Solid Oxide Fuel Cells by Wet Ceramic Powder Process