Abstract:A series of composites with nominal compositions of BaCe0.8Sm0.2O3-delta(BCS)-Ce0.8Sm0.2O1.9(SDC) (20:80, 35:65, 50:50, 65:35 wt.%) are synthesized by a modified citric acid-nitrate sol-gel combustion method and evaluated as the electrolytes for low-temperature solid oxide fuel cells (SOFCs). The TEM results show that doped BaCeO3 decorated SDC particles are formed after calcining at 1000 degrees C for 3 h. X-ray diffraction results reveal that the composites are only composed of BaCeO3-based and SDC phases without any other impurity phases. Besides, BaCeO3-based phase is uniformly distributed in the sintered electrolytes according to EDS element mapping. The open cell voltages (OCVs) of the single cells increase gradually with increasing the proportion of BaCeO3-based phase, and are higher than those for bare SDCbased cells. Besides, the power performances of the cells are superior to SDC-based cells when BaCeO3 based phase is lower than 35 wt.%. Electrochemical impedance spectroscopy analysis indicates that, in addition to blocking electronic current leakage, BaCeO3-based phase would induce higher ohmic and polarization resistance, which is detrimental to power performance. Further specific effort should be focused on synthesizing uniform SDC@BCS core-shell electrolyte powders and minimizing the proportion of BCS phase towards high-performance SOFCs with high OCVs. (C) 2017 Elsevier Ltd. All rights reserved.

Fabrication and Electrochemical Characterization of Anode-Supported Microtubular Solid Oxide Fuel Cells Based on Ce0.8sm0.2o2-D Electrolytes

A cathode-supported SOFC with thin Ce0.8Sm0.2O1.9 electrolyte prepared by a suspension spray

Fabrication And Characterization Of Ce0.8sm0.2o1.9 Microtubular Dual-Structured Electrolyte Membranes For Application In Solid Oxide Fuel Cell Technology

Fabrication and Characterization of Ce<sub>0.8</sub>Sm<sub>0.2</sub>O<sub>1.9</sub>Microtubular Dual-Structured Electrolyte Membranes for Application in Solid Oxide Fuel Cell Technology

Fabrication of Cathode Supported Solid Oxide Fuel Cell by Multi-Layer Tape Casting and Co-Firing Method

Low Temperature Solid Oxide Fuel Cells Based on Sm0.2Ce0.8O1.9 Films Fabricated by Slurry Spin Coating

Electrochemical Performance of a Solid Oxide Fuel Cell Based on Ce0.8Sm0.2O2−δ Electrolyte Synthesized by a Polymer Assisted Combustion Method

Low-temperature co-sintering of co-ionic conducting solid oxide fuel cells based on Ce 0.8 Sm 0.2 O 1.9 -BaCe 0.8 Sm 0.2 O 2.9 composite electrolyte

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

Preparation of Sm0.2Ce0.8O1.9 Membranes on Porous Substrates by a Slurry Spin Coating Method and Its Application in IT-SOFC

Micro-Tubular Solid Oxide Fuel Cells with Graded Anodes Fabricated with A Phase Inversion Method

Composite Electrolyte Based On Nanostructured Ce0.8sm0.2o1.9 (Sdc) For Low-Temperature Solid Oxide Fuel Cells

Low Temperature Solid Oxide Fuel Cell with Ba0.5sr0.5co0.8fe0.2o3 Cathode Prepared by Screen Printing

Electrical and Stability Performance of Anode-Supported Solid Oxide Fuel Cells with Strontium- and Magnesium-Doped Lanthanum Gallate Thin Electrolyte

Intermediate temperature solid oxide fuel cell composite cathodes consisting of nanostructured LSM and SDC particles

In-situ Formed Ce0.8Sm0.2O2−δ@Ba(Ce, Zr)1−x(Sm, Y)xO3−δ Core/shell Electron-Blocking Layer Towards Ce0.8Sm0.2O2−δ-based Solid Oxide Fuel Cells with High Open Circuit Voltages

Micro-Tubular Solid Oxide Fuel Cell with Asymmetric Structure Anode and La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode

Fabrication and Characterization of High Performance Intermediate Temperature Micro-Tubular Solid Oxide Fuel Cells

Direct Electrophoretic Deposition and Characterization of Thin-Film Membranes Based on Doped BaCeO3 and CeO2 for Anode-Supported Solid Oxide Fuel Cells

High performance proton-conducting solid oxide fuel cells with a stable Sm0.5Sr0.5Co3-δ-Ce0.8Sm0.2O2-δ composite cathode

Ce0.8sm0.2o1.9 Decorated with Electron-Blocking Acceptor-Doped Baceo3 As Electrolyte for Low-Temperature Solid Oxide Fuel Cells