Abstract:A geometric micro-model and experiment development are presented for electrolyte-coated anodes with high performance in solid oxide fuel cells. The anodes are based on electron conducting frameworks, where fine, oxygen-ion conducting inclusions are introduced via an ion impregnation process. The model shows that the length of triple-phase-boundary (TPB) increases with the loading of the coated electrolyte, and is dependent only on the loading before a maximum loading for monolayer coverage is obtained. The maximum loading increases with the porosity of the framework. As a result, the prolonged TPB length can be achieved by increasing the porosity and the loading. In the experimental study, Ni was used as the electron conductor, and samaria-doped ceria (SDC) was employed as the electrolyte to form anode-supported single cells. The cell performance was evaluated using humidified hydrogen as the fuel. The peak power density increased with SDC loading to a maximum value and decreased when the loading was further increased. The highest peak power density of the cells whose anodes were prepared with 10, 20 and 30wt.% pore former was 571, 631 and 723mWcm−2, corresponding to 508, 564 and 648mgcm−3 of SDC loading, respectively. The experimental results are in good agreement with the model prediction. Therefore, this work demonstrates theoretically and experimentally that optimization of the porosity and electrolyte loading is critical for further improving the performance of electrolyte-coated anodes.

Comparative Study of Solid Oxide Fuel Cells Supported on Ceramic Cathodes with Different Pore Structures

Tailoring the Pore Structure of Cathode Supports for Improving the Electrochemical Performance of Solid Oxide Fuel Cells

Metal-Supported Solid Oxide Fuel Cells with a Simple Structure

Improved Performance of a Symmetrical Solid Oxide Fuel Cell by Swapping the Roles of Doped Ceria and La0.6Sr1.4MnO4+δ in the Electrode

Electrical and Stability Performance of Anode-Supported Solid Oxide Fuel Cells with Strontium- and Magnesium-Doped Lanthanum Gallate Thin Electrolyte

Comparative study on the performance of tubular solid oxide fuel cells with various Pr0.35Nd0.35Sr0.3MnO3/YSZ cathode layers made by different processes

Solid Oxide Fuel Cells Supported on Cathodes with Large Straight Open Pores and Catalyst-Decorated Surfaces

Intermediate temperature solid oxide fuel cell composite cathodes consisting of nanostructured LSM and SDC particles

Fabrication and Electrochemical Characterization of Anode-Supported Microtubular Solid Oxide Fuel Cells Based on Ce0.8sm0.2o2-D Electrolytes

A Hierarchical Porous Microstructure for Improving Long-Term Stability of Ni1-Xcux/Sdc Anode-Supported It-Sofcs Fueled with Dry Methane

High performance electrolyte-coated anodes for low-temperature solid oxide fuel cells: Model and Experiments

Optimization of strontium molybdate based composite anode for solid oxide fuel cells

Preparation of Porous NiO-Ce0.8Sm0.2O1.9 Ceramics for Anode-supported Low-temperatureSolid Oxide Fuel Cells

Effect Of Samaria Doped Ceria Impregnation On The Electrochemical Performance Of Strontium Doped Lanthanum Chromium Manganite Anode For Solid Oxide Fuel Cells

Electrochemical performance and redox stability of solid oxide fuel cells supported on dual-layered anodes of Ni-YSZ cermet and Ni–Fe alloy

Effect of Characteristics of (Sm,ce)o-2 Powder on the Fabrication and Performance of Anode-Supported Solid Oxide Fuel Cells

Effects of doped ceria conductivity on the performance of La 0.6Sr 0.4Co 0.2Fe 0.8O 3-δ cathode for solid oxide fuel cell

Preparation of SDC Interlayer and Influence on Performances of Anode Supported Solid Oxide Fuel Cells

Fabrication and Performance of Pr-doped CeO2 Nanorods-Impregnated Sr-doped LaMnO3–Y2O3-stabilized ZrO2 Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Metal Supported Solid Oxide Fuel Cells with Infiltrated Nanoelectrodes

High-performance cathode-supported SOFCs prepared by a single-step co-firing process