Improved Electrochemical Performance of Sr 2 Fe 1.5 Mo 0.4 Nb 0.1 O 6−δ –sm 0.2 Ce 0.8 O 2−δ Composite Cathodes by a One-Pot Method for Intermediate Temperature Solid Oxide Fuel Cells
Mengjie Guan,Wang Sun,Rongzheng Ren,Qinghua Fan,Jinshuo Qiao,Zhenhua Wang,David Rooney,Jinsheng Feng,Kening Sun
DOI: https://doi.org/10.1016/j.ijhydene.2015.12.056
IF: 7.2
2016-01-01
International Journal of Hydrogen Energy
Abstract:In this paper, Sr2Fe1.5Mo0.4Nb0.1O6-delta (SFMNb)-xSm(0.2)Ce(0.8)P(2-delta) (SDC) = 0, 20, 30, 40, 50 wt %) composite cathode materials were synthesized by a one-pot combustion method to improve the electrochemical performance of SFMNb cathode for intermediate temperature solid oxide fuel cells (IT-SOFCs). The fabrication of composite cathodes by adding SDC to SFMNb is conducive to providing extended electrochemical reaction zones for oxygen reduction reactions (ORB.). X-ray diffraction (XRD) demonstrates that SFMNb is chemically compatible with SDC electrolytes at temperature up to 1100 degrees C. Scanning electron microscope (SEM) indicates that the SFMNb-SDC composite cathodes have a porous network nanostructure as well as the single phase SFMNb. The conductivity and thermal expansion coefficient of the composite cathodes decrease with the increased content of SDC, while the electrochemical impedance spectra (EIS) exhibits that SFMNb-40SDC composite cathode has optimal electrochemical performance with low polarization resistance (R-p) on the La0.9Sr0.1Ga0.8Mg0.2O3 electrolyte. The R-p of the SFMNb-40SDC composite cathode is about 0.047 Omega cm(2) at 800 degrees C in air. A single cell with SFMNb-40SDC cathode also displays favorable discharge performance, whose maximum power density is 1.22 W cm(-2) at 800 degrees C. All results indicate that SFMNb-40SDC composite material is a promising cathode candidate for IT-SOFCs. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.