Abstract:Sm0.2Ce0.8O1.9 (SDC)-impregnated La0.7Sr0.3MnO3 (LSM) composite cathodes were fabricated on anode-supported yttria-stabilized zirconia (YSZ) thin films. Electrochemical performances of the solid oxide fuel cells (SOFCs) were investigated in the present study. Four single cells, i.e., Cell-1, Cell-2, Cell-3 and Cell-4 were obtained after the fabrication of four different cathodes, i.e., pure LSM and SDC/LSM composites in the weight ratios of 25/75, 36/64 and 42/58, respectively. Impedance spectra under open-circuit conditions showed that the cathode performance was gradually improved with the increasing SDC loading. Similarly, the maximum power densities (MPD) of the four cells were increased with the SDC amount below 700°C. Whereas, the cell performance of Cell-4 was lower than that of Cell-3 at 800°C, arising from the increased concentration polarization at high current densities. This was caused by the lowered porosity with the impregnation cycle. This disadvantage could be suppressed by lowering the operating temperature or by increasing the oxygen concentration at the cathode side. The ratio of electrode polarization loss in the total voltage drop versus current density showed that the cell performance was primarily determined by the electrode polarization. The contribution of the ohmic resistance was increased when the operating temperature was lowered. When a 100mlmin−1 oxygen flow was introduced to the cathode side, Cell-3 produced MPDs of 1905, 1587 and 1179mWcm−2 at 800, 750 and 700°C, respectively. The high cell outputs demonstrated the merits of the novel and effective SDC-impregnated LSM cathodes.

LSM–SDC electrodes fabricated with an ion-impregnating process for SOFCs with doped ceria electrolytes

Fabrication of LSM-SDC Composite Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

Intermediate temperature solid oxide fuel cell composite cathodes consisting of nanostructured LSM and SDC particles

Effect of Sdc-Impregnated Lsm Cathodes on the Performance of Anode-Supported Ysz Films for Sofcs

Microstructures and Interfacial Resistance of Lsm-Sdc Composite Cathodes for It-Sofcs

Sol-gel derived composites as cathodes for solid oxide fuel cells

Electrochemical Characteristics of Lscf-Sdc Composite Cathode for Intermediate Temperature Sofc

Semiconductor-Ionic Nanocomposite La0.1Sr0.9MnO3−δ-Ce0.8Sm0.2O2−δ Functional Layer for High Performance Low Temperature SOFC

A cathode-supported SOFC with thin Ce0.8Sm0.2O1.9 electrolyte prepared by a suspension spray

Sm0.5Sr0.5CoO3–Ce1.8Sm0.2O1.9 Electrodes Enhanced by Sm0.5Sr0.5CoO3 Impregnation for Proton Conductor Based Solid Oxide Fuel Cells

A high performance intermediate-temperature solid oxide fuel cell using impregnated La0.6Sr0.4CoO3−δ cathode

Effect Of Samaria Doped Ceria Impregnation On The Electrochemical Performance Of Strontium Doped Lanthanum Chromium Manganite Anode For Solid Oxide Fuel Cells

Performance of La 0.5 Sr 0.5 Fe 0.9 Mo 0.1 O 3 − δ –Sm 0.2 Ce 0.8 O 2 − δ composite cathode for CeO 2 - and LaGaO 3 -based solid oxide fuel cells

Effect of firing temperature on the performance of LSM–SDC cathodes prepared with an ion-impregnation method

Improved Performance of a Symmetrical Solid Oxide Fuel Cell by Swapping the Roles of Doped Ceria and La0.6Sr1.4MnO4+δ in the Electrode

Impregnated LSM-YSZ electrodes with RuO2/SDC nanocomposites for solid oxide cells

Electrochemical Performance of La0.65Sr0.35MnO3 Oxygen Electrode with Alternately Infiltrated Sm0.5Sr0.5CoO3-δ and Sm0.2Ce0.8O1.9 Nanoparticles for Reversible Solid Oxide Cells

Electrochemical characteristics of an La0.6Sr0.4Co0.2Fe0.8O3–La0.8Sr0.2MnO3 multi-layer composite cathode for intermediate-temperature solid oxide fuel cells

Performance of La0.5Sr0.5Fe0.9Mo0.1O3 − δ–Sm0.2Ce0.8O2 − δ composite cathode for CeO2- and LaGaO3-based solid oxide fuel cells

Improved Thermal Expansion and Electrochemical Performance of La0.4Sr0.6Co0.9Sb0.1O3--Ce0.8Sm0.2O1.9 Composite Cathode for IT-SOFCs

Fabrication and Electrochemical Characterization of Anode-Supported Microtubular Solid Oxide Fuel Cells Based on Ce0.8sm0.2o2-D Electrolytes