Effect of firing temperature on the performance of LSM–SDC cathodes prepared with an ion-impregnation method

Lei Zhang,Fei Zhao,Ranran Peng,Changrong Xia

DOI: https://doi.org/10.1016/j.ssi.2007.12.013

IF: 3.699

2008-01-01

Solid State Ionics

Abstract:LSM (La0.85Sr0.15MnO3−δ)–SDC (Sm0.2Ce0.8O1.9) composites, which are based on LSM matrices embedded with SDC particles, were fabricated with an ion-impregnation technique as cathodes for intermediate and low temperature solid oxide fuel cells(SOFCs). Effect of heat-treatment temperatures for both LSM matrices and SDC particles was investigated on cathodic interfacial polarization resistances. When the matrix was fired in the range of 800–1000 °C, low temperature resulted in high specific surface area, and therefore low resistance. On the contrary, high temperature enhanced the bonding between the particles and matrices, and consequently caused increased electrochemical performance when the impregnated SDC was heated at temperature from 700 °C to 800 °C. With the impregnated LSM–SDC composite as the cathode, a single cell generated 138 mW/cm2 at 600 °C when humidified H2 was used as the fuel, suggesting that it is possible to use LSM as the cathodes for SOFCs that operated at low temperature when the microstructure is further optimized.