Abstract:It’s a critical issue for the successful commercialization of solid oxide fuel cells (SOFCs) to achieve long-term thermal stability without significant performance degradation. Current work reports a cost-competitive and scalable method for modifying porous Gadolinia doped ceria (GDC) barrier layers, to obtain an almost-dense, sintering-active, and Sr-blocking cathode/electrolyte interface, by growing nanoparticles in-situ on porous surfaces. The cell performance only deteriorates by ~0.5% after 20 times thermal cycles as the temperature fluctuated between 200 and 750 ℃, which is more prominent enhancement than ~16% for pristine cell, and exhibits higher initial performance. The hydrothermal modified symmetric cell shows ~60% polarization resistance decrease and well-attached cathode/electrolyte interfaces after ~1200 hours of operation, exhibiting excellent stability while the pristine cell interfaces peeled off. The performance improvements and prolonged operation mechanisms are discussed and mainly attributed to the almost-dense barrier layer and robust cathode/electrolyte interfaces.It’s a critical issue for the successful commercialization of solid oxide fuel cells (SOFCs) to achieve long-term thermal stability without significant performance degradation. Current work reports a cost-competitive and scalable method for modifying porous Gadolinia doped ceria (GDC) barrier layers, to obtain an almost-dense, sintering-active, and Sr-blocking cathode/electrolyte interface, by growing nanoparticles in-situ on porous surfaces. The cell performance only deteriorates by ~0.5% after 20 times thermal cycles as the temperature fluctuated between 200 and 750 ℃, which is more prominent enhancement than ~16% for pristine cell, and exhibits higher initial performance. The hydrothermal modified symmetric cell shows ~60% polarization resistance decrease and well-attached cathode/electrolyte interfaces after ~1200 hours of operation, exhibiting excellent stability while the pristine cell interfaces peeled off. The performance improvements and prolonged operation mechanisms are discussed and mainly attributed to the almost-dense barrier layer and robust cathode/electrolyte interfaces.

Improvement of Cathode–electrolyte Interfaces of Tubular Solid Oxide Fuel Cells by Fabricating Dense YSZ Electrolyte Membranes with Indented Surfaces

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet

YSZ-based SOFC with modified electrode/electrolyte interfaces for operating at temperature lower than 650°C

Improvement of the Performances of Tubular Solid Oxide Fuel Cells by Optimizing Co-Sintering Temperature of the NiO/YSZ Anode-Ysz Electrolyte Double Layers

Effect of Cathode Fabrication Method on Characteristics of Anode-Supported Tubular Solid Oxide Fuel Cells

Enhanced Cathode/Electrolyte Interface by a Nano-Modified Barrier Layer for Solid Oxide Fuel Cells

Scandia-stabilized Zirconia-Impregnated (la, Sr)MnO 3 Cathode for Tubular Solid Oxide Fuel Cells

Enhancement of the Cathode/electrolyte Interface by a Sintering-Active Barrier Layer for Solid Oxide Fuel Cells

An Anode-Supported Micro-Tubular Solid Oxide Fuel Cell with Redox Stable Composite Cathode

Self-assembled cathode induced by polarization for high-performance solid oxide fuel cell

A Novel Method to Purposely Modify the Anode/Electrolyte Interface in Solid Oxide Fuel Cells

Optimization of Ni YSZ Anodes for Tubular SOFC by a Novel and Efficient Phase Inversion-Impregnation Approach

Comparative study on the performance of tubular solid oxide fuel cells with various Pr0.35Nd0.35Sr0.3MnO3/YSZ cathode layers made by different processes

Performance and Optimization of Ni/3 Mol% Y2O3-ZrO2 Anode Supported SOFC

Tailoring the Microstructure of a Solid Oxide Fuel Cell Anode Support by Calcination and Milling of YSZ

Sputter-deposited medium-temperature solid oxide fuel cells with multi-layer electrolytes

Electrochemical performance and redox stability of solid oxide fuel cells supported on dual-layered anodes of Ni-YSZ cermet and Ni–Fe alloy

Improvement of Anode-Supported Solid Oxide Fuel Cells

Solid Oxide Fuel Cells with 3D Inkjet Printing Modified LSM-YSZ Interface

Fuel flexible SOFC with a Mo-doped CeO 2 /YSZ mesoporous anode fabricated by the evaporation induced self-assembly (EISA) method