Abstract:A Ni/scandia-stabilized zirconia (ScSZ) cermet anode was modified by coating with nano-sized gadolinium-doped ceria (GDC, Gd0.2Ce0.8O2) prepared using a simple combustion process within the pores of the anode for a solid oxide fuel cell (SOFC) running on methane fuel. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed in the anode characterizations. Then, the short-term stability for the cells with the Ni/ScSZ and 2.0wt.%GDC-coated Ni/ScSZ anodes in 97%CH4/3%H2O at 700°C was checked over a relative long period of operation. Open circuit voltages (OCVs) increased from 1.098 to 1.179V, and power densities increased from 224 to 848mWcm−2, as the operating temperature of an SOFC with 2.0wt.%GDC-coated Ni/ScSZ anode was increased from 700 to 850°C in humidified methane. The coating of nano-sized Gd0.2Ce0.8O2 particle within the pores of the porous Ni/ScSZ anode significantly improved the performance of anode supported cells. Electrochemical impedance spectra (EIS) illustrated that the cell with Ni/ScSZ anode exhibited far greater impedances than the cell with 2.0wt.%GDC-coated Ni/ScSZ anode. Introduction of nano-sized GDC particles into the pores of porous Ni/ScSZ anode will result in a substantial increase in the ionic conductivity of the anode and increase the triple phase boundary region expanding the number of sites available for electrochemical activity. No significant degradation in performance has been observed after 84h of cell testing when 2.0wt.%GDC-coated Ni/ScSZ anode was exposed to 97%CH4/3%H2O at 700°C. Very little carbon was detected on the anodes, suggesting that carbon deposition was limited during cell operation. Consequently, the GDC coating on the pores of anode made it possible to have good stability for long-term operation due to low carbon deposition.

Microstructure, Performance And Stability Of Ni/Al2o3 Cermet-Supported Sofc Operating With Coal-Based Syngas Produced Using Supercritical Water

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

Performance of a Ni/Al2O3 cermet-supported tubular solid oxide fuel cell operating with biomass-based syngas through supercritical water

Clean and Stable Conversion of Oxygen-Bearing Low-Concentration Coal Mine Gas by Solid Oxide Fuel Cells with an Additional Reforming Layer

Theoretical Electromotive Force and Performance of SOFC Fed with Different Fuel Gases

Effects of Coal Syngas Major Compositions on Ni/Ysz Anode-Supported Solid Oxide Fuel Cells

Numerical Analysis of the Possibility of Carbon Formation in Planar SOFC Fueled with Syngas

An efficient and durable solid oxide fuel cell integrated with coal gasification system

Performance of Ni/Scsz Cermet Anode Modified by Coating with Gd0.2ce0.8o2 for an Sofc Running on Methane Fuel

Optimization of Methane Reforming for High Efficiency and Stable Operation of SOFC Stacks

Numerical investigation of different loads effect on the performance of planar electrode supported SOFC with syngas as fuel

Controlled Deposition and Utilization of Carbon on Ni-Ysz Anodes of Sofcs Operating on Dry Methane

Stability of Ni-YSZ Anode for SOFCs in Methane Fuel: the Effects of Infiltrating La0.8Sr0.2FeO3-δand Gd-Doped CeO2Materials

An Efficient Construction of Nano-Interfaces for Excellent Coking Tolerance of Cermet Anodes

Syngas Production Via Coal Char-Co 2 Fluidized Bed Gasification and the Effect on the Performance of LSCFN//LSGM//LSCFN Solid Oxide Fuel Cell

Long-Term Operation and Post Analysis of a Stack with Methane Fuel

Performance of Solid Oxide Fuel Cells on H-2, Nh3 and Hydrocarbon Fuels

Solid Oxide Fuel Cells Using Gas Hydrates for Power and Syngas Cogeneration: A Thermodynamic and Experimental Assessment

Effects of Syngas Components on the Carbon Formation in Planar Solid Oxide Fuel Cell

Analysis of Gas Leakage and Current Loss of Solid Oxide Fuel Cells by Screen Printing

Influence of Characteristics of Stabilized Zirconia Electrolyte on Performance of Cermet Supported Tubular SOFCs