Abstract:Customized porous Al2O3-ZrO2-mullite composites were designed and prepared by reaction sintering of zircon (ZrSiO4) and alumina (Al2O3) at sintering temperatures from 1400 to 1600 °C for 3 h. The mechanical properties, microstructural evolution, and reaction mechanisms of the composites were investigated. The reactions between ZrSiO4 and Al2O3 were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectrometer (EDS). The results indicate that ZrSiO4 and Al2O3 react and form ZrO2 and mullite. Sintering temperature has an important effect on the reaction process. At 1400 °C, Al2O3 reacts directly with SiO2 of ZrSiO4 to form mullite and ZrO2, which reduces the decomposition temperature of ZrSiO4 and promotes the decomposition of ZrSiO4. However, at 1600 °C, ZrSiO4 first decomposes to form SiO2 and ZrO2, and then generates mullite by the diffusion of Si. The migration of Si is the key factor for the formation of mullite. The thermal shock resistance of the composites can be significantly improved by phase transformation toughening of in-situ ZrO2. Therefore, increasing the proportion of ZrSiO4 can significantly improve the mechanical properties of sample. The residual ratio of the flexural strength after thermal shock exceeded 90%, when the mass ratio of ZrSiO4 to Al2O3 was 3:1. Besides, the addition of polymethyl methacrylate could improve the porosity of materials and has a direct effect on the thermal conductivity of composites.

Mullite formation from reaction sintering of ZrSiO4/α-Al2O3 mixtures

The Effects of Mineral Composition and Sintering Temperature on Synthetic Mullite

Reaction sintering of ZrSiO4/α-Al2O3 mixed powders with Y2O3 addition

Reaction mechanisms and properties of in situ porous Al2O3-ZrO2-mullite composites

Preparation and Characterization of Mullite Whiskers from Different Silica Sources via Molten Salt Reaction

Preparation of Mullite from Low-grade Kaolin

Molten salt synthesis of mullite whiskers from various alumina precursors

Sinterability of ZrSiO4/α-Al2O3 Mixed Powders

Molten Salt Synthesis of Mullite Whiskers from Silicon Carbide Precursor

Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia

Microstructure and Mechanical Properties of Mullite Composites Via Pressure Molding and by Oxidation of an Al-Si Alloy Powder

Low sintering shrinkage and high strength of porous mullite–zirconia ceramics: Effect of AlF3 and ZrSi2 contents

Preparation and Thermal Stability of Zirconia-Doped Mullite Fibers Via Sol-Gel Method

Mechanical Properties and Microstructure of Al2o3/Mullite Composite

Low-temperature Synthesis of Highly Porous Whisker-Structured Mullite Ceramic from Kaolin

The Fabrication of Porous Mullite Ceramics Based on the Different Sizes of Aluminum Hydroxide

Influences of quartz and muscovite on the formation of mullite from kaolinite

The Preparation of Mullite Nanocomposites Powders from Silicon-Aluminium- Bearing Minerals Through Hydrothermal Crystallization

Phase and Microstructure Evolution of Mullite Synthesized from Coal Gangue and Γ-Al2o3

Reaction Bonding of Porous Mullite Ceramics

Preparation and properties of porous mullite-based ceramics fabricated by solid state reaction