Abstract:Composite ceramics of 0.7BaO center dot 0.3SrO center dot(I-gamma)TiO2 center dot gamma Nb2O5 (BSTN) with coexistence of barium strontium titanate, Ba1-xSrxTiO3 (BST), and strontium barium mobate, SrxBa1-xNb2O6 (SBN) phases were successfully prepared in situ by controlling excess components according to a specially designed formula of 0.7BaO center dot 0.3SrO center dot(1-gamma)TiO2 center dot gamma Nb2O5 and by using a traditional ceramic process. X-ray diffractometry (XRD), scanning electron microscopy (SEM) and energy dispersion spectrometer (EDS) were used to characterize the phase composition, morphology and the micro-area chemical composition of the composite ceramics. The results showed that the SBN tungsten bronze phase appeared and coexisted stably with the BST perovskite phase when the excess content of Nb2O5 was > 6mol%, whereas the BST perovsklite phase formed and coexisted stably with the SBN tungsten bronze phase when the excess content of TiO2 was > 5.3mol%. In the ease of the two phases being equivalent to each other in BSTN composite ceramics, Nb2O5 was hard to be resolved into the perovskite phase, however, a few of TiO2 was easy to be resolved in the tungsten bronze phase. The microstructure of the composite ceramics were consisted of two kinds of grains. The smaller polygonal grains were belonged to the BST phase, and the larger ones to the SBN phase. The coexistence of the two phases inhibited the growth of the BST crystal. The density of microstructure of the composite ceramic was higher than that of both the pure BST and SBN calcined at the same temperature for the same time.

In Situ Synthesis Mechanism Of Zrb(2)-Zrn Composite

Mechanical Properties and Microstructure of in Situ Synthesized ZrB 2 -Zrn 1− X Composites

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

In situ (Al3Zrp+Al2O3np)/2024Al metal matrix composite with controlled reinforcement architecture fabricated by reaction hot pressing

In situ (Al3Zr + Al2O3np)/2024Al metal matrix composite with novel reinforcement distributions fabricated by reaction hot pressing

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Fabrication of (Zr,Ti)B2-ZrN-BN composites through reactive spark plasma sintering of ZrB2 and TiN

A TEM study of nanostructures and interfaces in the hot-press sintered ZrB2–SiC–Si3N4 composites

In situ Preparation of BST(Nb)/SBN(Ti) Composites

The Effect of Nitrogen Pressure on in Situ Combustion Synthesis AIN-ZrN Composites

High temperature oxidation resistance of hot-pressed h-BN/ZrO 2 composites

Densification mechanism and corrosion resistance of h-BN/ZrO 2 ceramics prepared by spark plasma sintering

Combustion Synthesis of ZrN and AlN Using Si3N4 and BN As Solid Nitrogen Sources

Zrb2/Al2o3 Composite Powders Prepared by Self-Propagating High-Temperature Synthesis

PREPARATION AND INTERFACE ANALYSIS OF ZrB2/Al2O3 COMPOSITE POWDERS

Effect of Zr on the solid sintering process of SiBCN ceramics: Diffusion couple method experiment and DFT calculation

Reactive synthesis of alumina-boron nitride composites

Temperature‐dependent mechanical and oxidation behavior of in‐situ formed ZrN/ZrO2‐containing Si3N4‐based composite

Role of h-BN content on microstructure and mechanical properties of hot-pressed ZrB2–SiC composites

In-situ fabrication and characterization of W-ZrC composites via pressureless reaction sintering

Novel Structures and Mechanical Properties of Zr2N: Ab Initio Description under High Pressures*