Abstract:Aluminum Powder and RDX are important metal fuels and energetic oxidants in the field of solid propellants.The ignition test of nano-aluminum/RDX mixture samples at different pressures(0.1,0.4,0.7,1.0 MPa and 1.3 MPa)was carried out using a medium-pressure condenser heating experimental bench.The high speed photographer,two-color infrared thermometer and fiber optic spectrometer were used to study the combustion process.Results show that there is a significant heat evaporation stage before ignition.The duration of the flame development stage is less than that of the recession stage.Increasing pressure can effectively increase the combustion strength,but too high pressure will inhibit the flame development.As the pressure increases,evaporation stage and ignition overlap and ignition delay time is shortened.Based on the experimental conditions,the ignition delay time was 1004 ms at 0.1 MPa,and the maximum temperature was 1239 ℃.At 1.3 MPa,the ignition delay time was reduced to 319.2 ms,and the maximum temperature increased to 1441℃.At 0.1 MPa,samples burn incomplete and the self-sustaining burning time is the shortest.When the pressure is higher than 0.1 MPa,the self-sustaining burning time decreases with increasing pressure.

The Effect of Nitrogen Pressure on in Situ Combustion Synthesis AIN-ZrN Composites

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

Effect of nitrogen protective atmosphere on microstructure and property of nanocomposite coating

Effect of Reaction Atmosphere on Combustion Synthesis of Ti2AlN

Microstructure and mechanical properties of h-BN–SiC ceramic composites prepared by in situ combustion synthesis

In Situ Synthesis Mechanism Of Zrb(2)-Zrn Composite

EFFECT OF NITROGEN PRESSURE ON AFTERBURNING OF SHS AlN

Effect of Pressure on Condensing Ignition and Combustion Characteristics of Nano-Aluminum/RDX Mixture

Mechanical Properties and Microstructure of in Situ Synthesized ZrB 2 -Zrn 1− X Composites

Preparation of ZrN Nanopowders by Internal Gelation and Carbothermic Nitridation

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Phase Formation and Thermodynamic Analysis of Self-propagating High-temperature Synthesis Al–Zr–N System Composites

Synthesis of Si3N4–TiN–SiC Composites by Combustion Reaction under High Nitrogen Pressures

Combustion Synthesis of Ti(C,N) Powder

Synthesis of a Nitrided Composite Material from Ferroalumosilicozirconium during Combustion

Synthesis and Characterization of Zirconium Nitride Nanopowders by Internal Gelation and Carbothermic Nitridation

Combustion synthesis of α-Si3N4 powders using in-situ nano-SiO2 coated Si and Si3N4 reactants

Combustion synthesis of fine aluminum nitride powders under micropositive N 2 pressure with water additive

Effects of Nitrogen Pressure and Diluent Content on the Morphology of Gel-Cast-foam-assisted Combustion Synthesis of Elongated Β-Si3n4 Particles

Effect Of Nicral/Ysz/Nicral-B.E Composite Coating On Combustion Products Of High-Temperature Alpha