Abstract:This research presents a study on the fabrication and characterization of tungsten‐zirconium carbide (W-ZrC), an ultra-high temperature ceramic, using an in-situ reaction sintering method. Tungsten carbide (WC) and zirconia (ZrO 2 ) powders were used as precursors to synthesize composites with three different ratios. The thermodynamic phase stabilities of the precursor materials were analyzed, and the reaction products were determined based on the total pressure within the system. The fabricated composites were characterized by their microstructures, porosities, hardnesses, and thermal conductivities. The results show that the composites exhibited distinct crystal phases, including those of tungsten, tungsten carbide (W 2 C), zirconium carbide (ZrC), and tetragonal zirconia (t-ZrO 2 ). The reaction pathways were determined based on the composition ratios and thermodynamic stability. The composites demonstrate good densification and interparticle bonding owing to the in-situ reaction sintering process, which simplifies the fabrication and lowers processing costs. The composites also exhibited desirable properties, such as high hardness and thermal conductivity (maximum 36.4 W∙m −1 ∙K −1 ), making them suitable for high-temperature applications. The findings of this study contribute to the understanding of the synthesis process and properties of W-ZrC composites and provide insights for their potential applications to industries such as aerospace, defense, and nuclear energy.

In-situ fabrication and characterization of W-ZrC composites via pressureless reaction sintering

Dense Submicron-Sized ZrC – W Composite Produced by Reactive Melt in Fi Ltration at 1200 ° C

Microstructure and Properties of ZrC–W Composite Fabricated by Reactive Infiltration of Zr2Cu into WC/W Preform

In Situ Synthesis Mechanism and Characterization of ZrB2–ZrC–SiC Ultra High-Temperature Ceramics

In-situ reaction syntheis and mechanical properties of ultra high temperture ceramics

Preparation of W/ZrC Composites by Reactive Melt Penetration

Novel low temperature derived W f /W-ZrC-Cu composites by reactive infiltration with enhanced mechanical and thermal physical properties

W-ZrC composites prepared by reactive melt infiltration of Zr2Cu alloy into partially carburized W preforms

Reactive sintering behavior and enhanced densification of (Ti,Zr)B2–(Zr,Ti)C composites

Microstructure and Mechanical Properties of W-ZrC Composites Synthesized by Reactive Melt Infiltration of Zr2Cu into Porous Preforms from Partially Carburized W Powders

Microstructures and Enhanced Mechanical Properties of (Zr, Ti)(C, N)-Based Nanocomposites Fabricated by Reactive Hot-Pressing at Low Temperature

In situ reaction and solid solution induced hardening in (Ti,Zr)B 2 ‐(Zr,Ti)C composites

Evolution of Phase, Microstructure and ZrC Lattice Parameter in Solid-solution-treated W-ZrC Composite

Research Progress on Preparation and Properties of Zirconium Carbide Matrix Composites

Densification, microstructure and mechanical properties of ZrB2–SiCw ceramic composites

Effect of ZrC nano-powder addition on the microstructure and mechanical properties of binderless tungsten carbide fabricated by spark plasma sintering

Effect of ZrC nanopowder addition in WC preforms on microstructure and properties of W–ZrC composites prepared by the displacive compensation of porosity (DCP) method

In Situ Reaction and Solid Solution Induced Hardening in (Ti,zr)b2-(Zr,ti)c Composites

Pressureless Sintering of ZrC-based Ceramics by Enhancing Powder Sinterability

Processing of ZrC-W composites produced by reactive melt infiltration method

Ultrafast high-temperature sintering (UHS) of WC and WC-containing ZrB 2