Abstract:Through an optimized unique two‐stage pretreatment process, molten KCl insulates silicon particles in three contact modes, promoting complete and uniform nitriding of silicon powder. Meanwhile, at the nitriding temperature, with the multifunctional synergistic catalysis of metal Co and KCl, the silicon powder is finally completely converted into α‐Si3N4. At present, the Si3N4 powder prepared is not pure enough. Therefore, this work introduces a novel method of preparing high‐purity α‐Si3N4 powder. Si3N4 powder with high α phase content was prepared via a unique two‐stage temperature‐rise (TSTR) process, using KCl and metal Co as dual catalysts through low‐temperature pretreatment for silicon powder and subsequent high‐temperature nitriding reaction. Molten KCl insulates silicon particles in three contact modes during low‐temperature pretreatment, promoting complete and uniform nitriding and absorbing the heat released during the reaction. In addition, Co forms a Co–Si liquid phase, causing the reaction to transition into a gas–liquid–solid reaction with lower potential energy, thereby reducing the reaction temperature. Through the synergistic effect of the two catalysts and optimized unique TSTR process, Si3N4 powder can be obtained at 1250°C, boasting a remarkably high α phase content of 99.1%, distinguished by its layered, needle‐like, and spherical structures. The detailed experiments first provide a comprehensive explanation of the growth mechanism of α‐Si3N4. This innovative method for preparing Si3N4 powder offers a new approach to the facile production of high‐purity phase ceramic powder.

Processing of Β‐silicon Nitride from Water‐Based Alpha‐silicon Nitride, Alumina, and Yttria Powder Suspensions

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Surface Characterization of Silicon Nitride Powder and Electrokinetic Behavior of Its Aqueous Suspension

Effect of Acid Cleaning and Calcination on Rheological Properties of Concentrated Aqueous Suspensions of Silicon Nitride Powder

Water-Based Gelcasting of Surface-Coated Silicon Nitride Powder

Rheological Properties of Boron Nitride-Silica Composite Suspensions

Dispersion Properties of Silicon Nitride Powder Coated with Yttrium and Aluminium Precursors

Aqueous Processing, Hot-Pressing and Mechanical Properties of Silicon Carbide with Al2O3 and Y2O3

Synthesis of alpha-Si3N4 whiskers or equiaxed particles from amorphous Si3N4 powders

Effects of Powder Surface Modification and Amount of Oxide Additives on Rheological Property of Si<sub>3</sub>N<sub>4</sub> Aqueous Suspension

Rheology of organics-free aqueous ceramic suspensions for additive manufacturing of dense silicon nitride ceramics

Influence of powder pre-treatments on dispersion ability of aqueous silicon nitride-based suspensions

Direct Coagulation Casting of Silicon Nitride Suspension Via a Dispersant Reaction Method

Preparation of silicon nitride powder from silica and ammonia

Fabrication of Spherical Thermal-Conductive Silicon Nitride Powder

Hydrolysis control of AlN powders for the aqueous processing of spherical AlN granules

Preparation of High Concentrated Suspension and Gelcasting Process for Silicon Nitride Bonded Silicon Carbide Refractories

Synthesis of Si 3 N 4 powder with tunable α/β-Si 3 N 4 content from waste silica fume using carbothermal reduction nitridation

Preparation of high‐purity α‐Si3N4 powder via multifunctional synergistic catalysis and pretreatment method

De-stabilization Mechanism and in Situ Solidification of Alumina Slurry Dispersed in Silica Sol

Preparation of Si3n4 Ceramics with High Strength and High Reliability Via A Processing Strategy