Abstract:A colloidal stability study of a nonaqueous silicon carbide suspension is of great significance for preparing special silicon carbide ceramics by colloidal processing. In this paper, three different chemical dispersants, which are amphiphilic, acidophilic, and alkaliphilic, are selected to compare their ability to stabilize nonaqueous slurries of silicon carbide. The analysis of the flow index factor is first used to estimate the colloidal stability of the suspensions. The results show that the addition of only 5 wt.% polyvinylpyrrolidone (PVP) forms a silicon carbide slurry with a low viscosity value of 17 mPa⋅s at 25 s−1. In addition, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS)measurements indicate that the PVP molecule is successfully adsorbed on the surface of silicon carbide. The different adsorption models are fitted, and the adsorption of PVP molecules on the surface of silicon carbide belongs to the Langmuir single-layer adsorption model. At the optimal PVP amount, the volume content of the suspension is as high as 22.27 vol.%, a Newtonian-like fluid still appears, and no agglomerate structure is formed in the system. After the volume content exceeds 22.27 vol.%, the flow index factor of the slurry begins to plummet, indicating that the slurry begins to transform from a Newtonian-like fluid to a shear-thinning fluid. The particles undergo inevitable agglomeration accompanied by the emergence of yield stress. Finally, a maximum solid loading of the system is predicted to be 46 vol.%, using the Krieger-Dougherty model.

Effect of Acid Cleaning and Calcination on Rheological Properties of Concentrated Aqueous Suspensions of Silicon Nitride Powder

Effects of Powder Surface Modification and Amount of Oxide Additives on Rheological Property of Si<sub>3</sub>N<sub>4</sub> Aqueous Suspension

Surface Characterization of Silicon Nitride Powder and Electrokinetic Behavior of Its Aqueous Suspension

Surface Characteristics and Aqueous Dispersibility of Commercial Silicon Nitride Powders: Effects of Acid Leaching, Surface Hydrolysis, and Thermal Oxidation

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Surface Characteristics and Aqueous Dispersibility of Commercial Silicon Nitride Powders: Comparison of As-Received Powders

New Route to Improve the Fracture Toughness and Flexural Strength of Si3N4 Ceramics by Adding FeSi2

Influence of powder pre-treatments on dispersion ability of aqueous silicon nitride-based suspensions

Influence of surface oxide layer of SiC powder on the rheological properties of its slurry

Processing of Β‐silicon Nitride from Water‐Based Alpha‐silicon Nitride, Alumina, and Yttria Powder Suspensions

Rheology of organics-free aqueous ceramic suspensions for additive manufacturing of dense silicon nitride ceramics

Preparation of highly dispersed nanosilica from rice husk by aprecipitation method combined with high pressure homogenization

Rheological properties and thixotropy model of concentrated aqueous silicon slurry for gel casting

Study on Rheological Behavior of Micro/Nano-Silicon Carbide Particles in Ethanol by Selecting Efficient Dispersants

Dispersion Properties of Silicon Nitride Powder Coated with Yttrium and Aluminium Precursors

Si 3 N 4 slurry with high solid phase, low viscosity prepared via surface-oxidation and silane coupling agent modification hybrid method

Effects of liquid medium and ball-milling on the surface group and aqueous dispersibility of Si3N4 powder

Effect of temperature on rheological behavior of silicon carbide aqueous suspension

Effects of Surface Modification by Liquids on Surface Group and Dispersibility of Si3N4 Powder

Rheology of Fumed Silica/Polydimethylsiloxane Suspensions

Study on the Rheology of Acetic Acid Modified SiC Powder and Pastes Reinforced by Solvothermal Method