Abstract:Two light emissive organic light-emitting diodes (OLEDs) of high performance were prepared by vacuum thermal evaporation using two kinds of silole derivatives 1,2-bis(1-methyl-2,3,4,5-tetraphenyl-1H-silole-1-yl)ethane (BMPSiE) and 1,1′-dimethyl-3,3′,4,4′-tetraphenyl-2,2′,5,5′-tetra(thiophen-2-yl)-1,1′-bi(1H -silole) (BMPThSi) as emitting materials, N, N′-diphenyl-N,N′-bis(3-methylphenyl)-1,1′-biphenyl-4,4′-diamine(NPB) and tris(8- hydroxyquinolinolato) aluminum (Alq3) as hole transporting layer (HTL) and electron transporting layer (ETL), respectively. The luminance-voltage and current density-voltage characteristics of devices were investigated, and the difference between their performances was discussed. The results demonstrate that at a bias voltage of 20 V, the device consisting of novel emissive material BMPSiE had a maximum luminance of 9991.9 cd·m-2 and the device of BMPThSi had a maximum luminance of 15261.5 cd·m-2. The peaks of electroluminescence (EL) spectra were located at 483 and 495 nm, respectively, which were in good accordance with the photoluminescent characteristics. The Commissions International d′Eclairage (CIE) coordinates were located at (0.202, 0.337) and (0.246, 0.419), which were independent on the variation of forward bias.

Organic Light-Emitting Diodes with N-Type Silicon Anode

A Top-Emission Organic Light-Emitting Diode with a Silicon Anode and an Sm∕Au Cathode

Electron-irradiated N+-Si As Hole Injection Tunable Anode of Organic Light-Emitting Diode

Experimental study of the organic light emitting diode with a p-type silicon anode

Efficient silicon quantum dots light emitting diodes with an inverted device structure

Passivated P-Type Silicon: Hole Injection Tunable Anode Material For Organic Light Emission

Inverted Top-Emission Organic Light-Emitting Device with N-Type Silicon As Cathode

Improvement of the charge imbalance caused by the use of a p-type silicon anode in an organic light-emitting diode

Hybrid Organic Light Emitting Device with Silicon-Rich Oxide As Hole Transporting Layer

Au Generation Centres Doped N(+)-Si: Hole-Injection Adjustable Anode for Efficient Organic Light Emission

High-Efficiency Phosphorescent Organic Light-Emitting Diode with Au-Doped N+-Si Anode

Enhanced Hole Injection in a Bilayer Vacuum-Deposited Organic Light-Emitting Device Using a P-Type Doped Silicon Anode

Efficient 1.54μm Light Emitting Diode with Nanometer Thick Polycrystalline Si Anode and Organic Sandwich Structure

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Top-Emission Si-Based Phosphor Organic Light Emitting Diode With Au Doped Ultrathin N-Si Film Anode And Bottom Al Mirror

Efficient Organic Light-Emitting Diodes Using Polycrystalline Silicon Thin Films As Semitransparent Anode

Organic Light-Emitting Diodes Based on New Silole Derivatives

High Colour Rendering Index White Organic Light-Emitting Devices with Three Emitting Layers

Hybrid Organic Light-Emitting Device with Inorganic Mobility-Tunable Hole Transport Layer of Silicon-Rich Silicon Oxide

High-Efficiency Microcavity Top-Emitting Organic Light-Emitting Diodes Using Silver Anode

Low-voltage Top-Emitting Organic Light-Emitting Devices with an Organic Double-Heterojunction Structure