Abstract:Fabrication of organic light-emitting diodes (OLEDs) and lasers on silicon substrates is a feasible route to integrate microelectronic chips with optical devices for telecommunications. However, the efficiency of Si-anode based OLEDs is restricted by the imbalance of hole–electron injection because a p-type Si anode owns better hole injection ability than ITO. We have used fluorinated tris-(8-hydroxy-quinolinato) aluminum (FAlq3) derivatives to prepare Si-anode based OLEDs. We observed that, when tris-(5-fuloro-8-hydroxyquinolinato) aluminum (5FAlq3) is used as the electron-transporting material instead of Alq3, the cathode electron injection is enhanced due to its lower lowest unoccupied molecular orbital (LUMO) compared to the Alq3. The device can keep the relative carrier balance even when a Si anode capable of stronger hole injection was used. Further optimization of the device structure by introducing 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) as a hole blocking layer showed significant increase in the device power efficiency from 0.029 to 0.462lm/W. This indicates that use of fluorinated Alq3 derivatives is an effective way to improve the performance of Si-anode based OLEDs.

Passivated P-Type Silicon: Hole Injection Tunable Anode Material For Organic Light Emission

Electron-irradiated N+-Si As Hole Injection Tunable Anode of Organic Light-Emitting Diode

Au Generation Centres Doped N(+)-Si: Hole-Injection Adjustable Anode for Efficient Organic Light Emission

Optimizing Efficiency of Polycrystalline P-Si Anode Organic Light-Emitting Diode

Experimental study of the organic light emitting diode with a p-type silicon anode

Efficient Organic Light-Emitting Diodes Using Polycrystalline Silicon Thin Films As Semitransparent Anode

Improvement of the charge imbalance caused by the use of a p-type silicon anode in an organic light-emitting diode

Effects of Resistivity of a P‐si Chip on the Light‐emitting Efficiency of a Top‐emission Organic Light‐emitting Diode with the P‐si Chip As the Anode

Hybrid Organic Light Emitting Device with Silicon-Rich Oxide As Hole Transporting Layer

Organic Light-Emitting Diodes with N-Type Silicon Anode

Improving charge-injection balance and cathode transmittance of top-emitting organic light-emitting device with p-type silicon anode

A Top-Emission Organic Light-Emitting Diode with a Silicon Anode and an Sm∕Au Cathode

The enhanced electron injection by fluorinated tris-(8-hydroxy-quinolinato) aluminum derivatives in high efficient Si-anode OLEDs

Inverted Top-Emission Organic Light-Emitting Device with N-Type Silicon As Cathode

Efficient 1.54μm Light Emitting Diode with Nanometer Thick Polycrystalline Si Anode and Organic Sandwich Structure

Enhanced Hole Injection in a Bilayer Vacuum-Deposited Organic Light-Emitting Device Using a P-Type Doped Silicon Anode

Improved Hole Injection And Transport Of Organic Light-Emitting Devices With An Efficient P-Doped Hole-Injection Layer

Enhanced Hole Injection Characteristics of a Top Emission Organic Light-Emitting Diode with Pure Aluminum Anode

Hybrid Organic Light-Emitting Device with Inorganic Mobility-Tunable Hole Transport Layer of Silicon-Rich Silicon Oxide

Improvement of Electron–hole Injection Balance in Si-anode Organic Light-Emitting Diodes by Using Enhanced Electron Injection Organic of Fluorinated Tris-(8-hydroxy-quinolinato) Aluminum

P‐124: Efficiency Enhanced Top Emitting OLED‐on‐Silicon Microdisplay with Aluminum Anode