Abstract:Fabrication of organic light-emitting diodes (OLEDs) and lasers on silicon substrates is a feasible route to integrate microelectronic chips with optical devices for telecommunications. However, the efficiency of Si-anode based OLEDs is restricted by the imbalance of hole–electron injection because a p-type Si anode owns better hole injection ability than ITO. We have used fluorinated tris-(8-hydroxy-quinolinato) aluminum (FAlq3) derivatives to prepare Si-anode based OLEDs. We observed that, when tris-(5-fuloro-8-hydroxyquinolinato) aluminum (5FAlq3) is used as the electron-transporting material instead of Alq3, the cathode electron injection is enhanced due to its lower lowest unoccupied molecular orbital (LUMO) compared to the Alq3. The device can keep the relative carrier balance even when a Si anode capable of stronger hole injection was used. Further optimization of the device structure by introducing 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) as a hole blocking layer showed significant increase in the device power efficiency from 0.029 to 0.462lm/W. This indicates that use of fluorinated Alq3 derivatives is an effective way to improve the performance of Si-anode based OLEDs.

Top-Emission Si-Based Phosphor Organic Light Emitting Diode With Au Doped Ultrathin N-Si Film Anode And Bottom Al Mirror

Highly Efficient Phosphorescent Organic Light-Emitting Diode with a Nanometer-Thick Ni Silicide/polycrystalline P-Si Composite Anode.

A Top-Emission Organic Light-Emitting Diode with a Silicon Anode and an Sm∕Au Cathode

High-Efficiency Phosphorescent Organic Light-Emitting Diode with Au-Doped N+-Si Anode

Optimizing Efficiency of Polycrystalline P-Si Anode Organic Light-Emitting Diode

Au Generation Centres Doped N(+)-Si: Hole-Injection Adjustable Anode for Efficient Organic Light Emission

Highly Efficient Top-Emitting Organic Light-Emitting Devices with Aluminium Electrodes

Inverted Top-Emission Organic Light-Emitting Device with N-Type Silicon As Cathode

Efficient 1.54μm Light Emitting Diode with Nanometer Thick Polycrystalline Si Anode and Organic Sandwich Structure

Electron-irradiated N+-Si As Hole Injection Tunable Anode of Organic Light-Emitting Diode

High-Efficiency Microcavity Top-Emitting Organic Light-Emitting Diodes Using Silver Anode

Efficiency Improvement of Phosphorescent Organic Light-Emitting Diodes Using Semitransparent Ag As Anode

Combination of passivated Si anode with phosphor doped organic to realize highly efficient Si-based electroluminescence

22.3: High Efficiency Electrophosphorescent Organic Light Emitting Diodes Using Semitransparent Ag As Anode

High-Performance Top-Emitting White Organic Light-Emitting Devices

Efficient Organic Light-Emitting Diodes Using Polycrystalline Silicon Thin Films As Semitransparent Anode

Experimental study of the organic light emitting diode with a p-type silicon anode

The enhanced electron injection by fluorinated tris-(8-hydroxy-quinolinato) aluminum derivatives in high efficient Si-anode OLEDs

Enhanced Efficiency of Organic Light-Emitting Devices by Using a Directly Imprinted Nanopillared Ultrathin Metallic Electrode.

Robust Laminated Anode with an Ultrathin Titanium Nitride Layer for High-Efficiency Top-Emitting Organic Light-Emitting Diodes

P‐124: Efficiency Enhanced Top Emitting OLED‐on‐Silicon Microdisplay with Aluminum Anode