Abstract:With the continuous improvement in the precision of the laser powder bed fusion (LPBF) process, printing parts with highly complex geometries and fine details has been realized. Given the large design freedom provided by LPBF, various shell lattice structures have been designed and fabricated successfully. However, few works focus on predicting and minimizing the discrepancy between as-designed and as-printed structures, which is crucial for the geometric fidelity and resulting structural performance. This is partially due to the complexity of structures with thin-walled features and continuously changing overhang angles. This paper proposed a new method and workflow to predict the printing deviation and conduct the compensation for the thin-walled shell lattice structures fabricated by the high-precision LPBF (hp-LPBF). Numerical simulation, which was used to capture dynamic interaction behavior between the rake, powder particles, and samples, was performed using the discrete element method (DEM) to identify the key factors affecting the deviation prediction. Subsequently, a semi-analytical model was proposed to predict the as-printed thicknesses, in which the molten depth-induced staircase effect, compression-induced thickening effect, and scrape-induced thinning effect were considered. Both inclination angles and wall thickness were observed to have significant influences on the roughness and dimensional accuracy, of which three types of deviation were determined: (1) non-compensable deviation; (2) large but compensable deviation; (3) negligible deviation under 5%. Experimental results show that, by pre-compensation, the geometric deviation of thin walls with thicknesses of 135 μm and 185 μm was controlled to less than 10μm. The effectiveness and generality of this method for the thin-walled shell structures were further demonstrated by a case study of Schwarz Primitive triply periodic minimal surface lattice structure, which is characterized by micro-CT using the proposed workflow to predict and modify the lattice thickness and generate the compensated geometry for printing.

Slope Limit of Part Made in Metal Powder Laser Shaping

Influence of Powder Flow on Sidewall Quality of Solid Parts in Laser Metal Direct Forming

Sidewall shape control using direct laser fabrication technology

Analysis of brittle layer forming mechanism in Ti6Al4V sloping structures by SLM technology

Geometric deviation and compensation for thin-walled shell lattice structures fabricated by high precision laser powder bed fusion

Study of the Effect of Selective Laser Melting Process Parameters on Overhang Structures

The Influence of Standoff Variations on the Forming Accuracy in Laser Direct Metal Deposition

Laser Metal Deposition with Spatial Variable Orientation Based on Hollow-Laser Beam with Internal Powder Feeding Technology

Self-Regulation-Effect in Laser Direct Metal Manufacturing

Effect of Initial Surface Morphology and Laser Parameters on the Laser Polishing of Stainless Steel Manufactured by Laser Powder Bed Fusion

Research on the Forming Process of Three-Dimensional Metal Parts Fabricated by Laser Direct Metal Forming

Laser Cladding Path Planning for Curved Metal Parts

Influence of scanning pattern on the edge collapse of solid parts in laser metal direct forming

Effects of machining surface and laser beam scanning strategy on machinability of selective laser melted Ti6Al4V alloy in milling

Effects of Process Parameters and Scanning Patterns on Quality of Thin-Walled Copper Flanges Manufactured by Selective Laser Melting

Laser incidence angle influence on energy density variations, surface roughness, and porosity of additively manufactured parts

Overlap ratio and scanning strategy effects on laser powder bed fusion Ti6Al4V: numerical thermal modeling and experiments

Effect of processing parameters on overhanging surface roughness during laser powder bed fusion of AlSi10Mg

Investigating the Effects of Powder Feeding Rate on Microstructure Transformation in Linear Laser Beam Additive Manufactured Thick-Walled Structures

Experimental and computational appraisal of the shape accuracy of a thin-walled virole aero-engine casing manufactured by means of laser metal deposition

Numerical Analysis of Rotating Scans' Effect on Surface Roughness in Laser-Powder Bed Fusion