Abstract:Selective laser melting (SLM) is an additive manufacturing process that involves the layer-by-layer construction of a three-dimensional object by local melting of a powder layer based on a prepared CAD model. This technology makes it possible to manufacture products of complex configuration, including internal channels of complex geometry. Such products include personalized highly porous implants, which are subject to very strict requirements in the field of elastic and strength properties, ensuring their compliance with the properties of the biological objects being replaced. The quality of highly porous cellular products formed by the selective laser melting method based on metal powder compositions is determined by a significant number of factors, the combined influence of which is difficult to control. At the same time, the structure and mechanical properties of highly porous cellular materials (HPCM) obtained by laser synthesis are largely determined by the melt bath shape stability, which depends on the ability of local heat dissipation, which in turn is determined by the fused product geometry. Under these conditions, simulation of thermal processes, including the prediction of the part fusion temperature modes, is of paramount importance. This study focuses on the numerical analysis of the powder layer thermophysical parameters during the laser melting process, which is difficult to analyze by direct measurements, and a computational model based on COMSOL Multiphysics has been created to predict the melt bath temperature field. The numerical model made it possible to quantify the influence of the selective laser melting process parameters (laser power and scanning speed) in combination with the choice of material and topology of the part on the temperature fields formation to determine the process technological parameter and the features of creating geometry for additive manufacturing, which make it possible to obtain products of proper quality. Cellular implants based on Ti6Al4V powder have been grown by selective laser melting.

Study of the Effect of Selective Laser Melting Process Parameters on Overhang Structures

Experimental investigation on the factors affecting the quality of titanium alloy overhang via selective laser melting forming

Effect of processing parameters on overhanging surface roughness during laser powder bed fusion of AlSi10Mg

Study on the effects of the processing parameters on the single tracks and the block support structures fabricated by selective laser melting

Effect of Overlapping Remelting on Microstructures and Mechanical Properties of Selective Laser‐Melted Ti‐6Al‐4V Alloy

Coupling Analysis on Microstructure and Residual Stress in Selective Laser Melting (SLM) with Varying Key Process Parameters

Effect of Processing Parameters on Tensile Properties and Microstructure of Selective Laser Melted AlSi10Mg Alloy

Effect of processing parameters on overhanging channel forming quality during laser powder bed fusion of AlSi10Mg

Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V

Effect Of Scanning Routes On The Stress And Deformation Of Overhang Structures Fabricated By Slm

The Effects of Overhang Forming Direction on Thermal Behaviors during Additive Manufacturing Ti-6Al-4V Alloy

Process parameter optimization for selective laser melting Ti-6Al-4V with high layer thickness

Effect of Process Parameters and Layer Thickness on the Quality and Performance of Ti-6Al-4V Fabricated by Selective Laser Melting

The effect of process parameters on the physical and mechanical properties of Ti fabricated by selective laser melting using ball milled powders

Quality assurance thermophysical aspects of highly porous implants with cellular structure obtained by selective laser melting

Achievement of a Parameter Window for the Selective Laser Melting Formation of a GH3625 Alloy

Surface roughness improvement of Ti-6Al-4V alloy overhang structures via process optimization for laser-powder bed fusion

Effects of machining surface and laser beam scanning strategy on machinability of selective laser melted Ti6Al4V alloy in milling

Analysis of brittle layer forming mechanism in Ti6Al4V sloping structures by SLM technology

Difference-extent of microstructure and mechanical properties: Simulating multi-laser selective melting Ti6Al4V

Influence of Typical Technological Parameters on the Forming Quality of TA1 in Selective Laser Melting