Abstract:With the continuous improvement in the precision of the laser powder bed fusion (LPBF) process, printing parts with highly complex geometries and fine details has been realized. Given the large design freedom provided by LPBF, various shell lattice structures have been designed and fabricated successfully. However, few works focus on predicting and minimizing the discrepancy between as-designed and as-printed structures, which is crucial for the geometric fidelity and resulting structural performance. This is partially due to the complexity of structures with thin-walled features and continuously changing overhang angles. This paper proposed a new method and workflow to predict the printing deviation and conduct the compensation for the thin-walled shell lattice structures fabricated by the high-precision LPBF (hp-LPBF). Numerical simulation, which was used to capture dynamic interaction behavior between the rake, powder particles, and samples, was performed using the discrete element method (DEM) to identify the key factors affecting the deviation prediction. Subsequently, a semi-analytical model was proposed to predict the as-printed thicknesses, in which the molten depth-induced staircase effect, compression-induced thickening effect, and scrape-induced thinning effect were considered. Both inclination angles and wall thickness were observed to have significant influences on the roughness and dimensional accuracy, of which three types of deviation were determined: (1) non-compensable deviation; (2) large but compensable deviation; (3) negligible deviation under 5%. Experimental results show that, by pre-compensation, the geometric deviation of thin walls with thicknesses of 135 μm and 185 μm was controlled to less than 10μm. The effectiveness and generality of this method for the thin-walled shell structures were further demonstrated by a case study of Schwarz Primitive triply periodic minimal surface lattice structure, which is characterized by micro-CT using the proposed workflow to predict and modify the lattice thickness and generate the compensated geometry for printing.

Sidewall shape control using direct laser fabrication technology

Analysis of brittle layer forming mechanism in Ti6Al4V sloping structures by SLM technology

Study on the Stability in Laser Cladding Forming Process of Thin-Wall Structures

Surface Evenness Control of Laser Solid Formed Thin-Walled Parts Based on the Mathematical Model of the Single Cladding Layer Thickness

An improved fused deposition modeling process for forming large-size thin-walled parts

Study on the Deformation Control and Microstructures of Thin-Walled Parts Repaired by Laser Cladding

Deformation and control method of thin-walled part during laser powder bed fusion of Ti–6Al–4V alloy

Effect of scanning tracks on the contour morphology and dimensional accuracy of the fine structure manufactured by laser powder bed fusion

Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy

Experimental study on the sidewall quality of femtosecond laser drilling CFRP

Investigation on Forming Process and Product Properties of Laser Wire-Feed Additive Manufacturing for High-Quality Metal Thin-Walled Parts

Support Removal on Thin-Walled Parts Produced by Laser Powder Bed Fusion

Novel strategy for automated quality enhancement of up-facing inclined surfaces by incremental dual laser powder bed fusion

Formation mechanisms and control strategies of metallurgical defects and microstructures during laser powder bed fusion of AlSi10Mg lattice structures

Identifying optimum process strategy to build geometrically stable cylindrical wall structures using laser directed energy deposition based additive manufacturing

Effect of oblique angle on the formability, crystal growth behavior and microstructure in laser direct energy deposited thin-wall structure of single-crystal superalloy

Investigation on the Formation Mechanism of Collapse Defects, Microstructural Evolution and Mechanical Properties in Full Penetration Laser Welding of Thick-Section Steel

Rapid and high-accuracy forming of ceramic parts by DLP technology based on optimization of shear stress

Geometric deviation and compensation for thin-walled shell lattice structures fabricated by high precision laser powder bed fusion

The Forming Control Method of Multi-Track Laser Cladding on Curved Surface

Study of Biomass Composite Workpiece Support Structure Based on Selective Laser Sintering Technology