Abstract:Overhangs are usually inevitable in Additive Manufacturing (AM). Moreover, making their downward surfaces reach higher accuracy after printing has an imperative impact on improving the accuracy of them and their corresponding as-printed parts. Although extensive studies have been devoted to improving the accuracy of as-printed parts, the effective, general, reliable, and less-consumption (in time and material) approach to make an overhang (especially on its downward surfaces) reach its ideal accuracy is still rare. Hence, a new machine-leaning-based geometric compensation approach is proposed in this study. First, based on the Taguchi method, a series of (overhang) benchmarks are designed and printed to collect the (geometric) deviations of the downward surfaces. With these data, a new deviation predictor is established based on the gaussian process regression model. The predictor can effectively predict the deviation(s) (as well as its corresponding quantified uncertainty) of each downward surface (after printing) by using a pointwise manner. Meanwhile, to make the downward surface of an overhang meet its ideal accuracy (after printing) with high confidence, a specific stochastic chance-constrained programming problem is first formulated to evaluate the new and suitable overhang height of each point on the downward surface. Based on the above-mentioned predictor, the programming problem gets solved by developing a new overhang-height optimization method that integrates the Monte Carlo simulation with the particle swarm optimization. After that, a support structure-associated compensation method is presented to make a pointwise compensation (according to the above-evaluated overhang height) on the downward surface and determine the support structures’ optimized number and anchor positions. Finally, experiments on several representative overhangs are also implemented based on a typical material extrusion machine to validate the effectiveness of the proposed approach. The results show that the proposed approach reduces the deviations of the downward surface by up to 63.92% on average, saving up to 40% of material (less support structures). In addition, methodological comparisons with state-of-the-art approaches are also implemented. The comparisons show that the proposed approach has the great potential to reliably improve the accuracy of the overhang’s downward surface(s) after printing in a less-consumption manner.

Geometric deviation and compensation for thin-walled shell lattice structures fabricated by high precision laser powder bed fusion

A High-Confidence Geometric Compensation Approach for Improving Downward Surface Accuracy

Support Equilibrium Design for Laser Additive Manufacturing of Lightweight Component Based on Geometric Deformation Minimization

Predicting and Optimizing the Dimensions of Rod in Lattice Structures Fabricated by Laser Powder Bed Fusion

Height Consistency Compensation in Laser-Directed Energy Deposition of Thin-Walled Parts

Residual Deformation Analysis of Laser Powder Bed Fusion-Fabricated Lattice Structures

Experimental Investigation and Numerical Modeling of Laser Powder Bed Fusion Process-Induced Angle-Dependent Defects in Strut-Based Lattice Structure

Thermo-mechanical modeling of lattice-core sandwich panels in powder bed fusion

A Real-Time Method to Detect the Deformation Behavior During Laser Solid Forming of Thin-Wall Structure

Improving component dimensional accuracy in electron beam powder bed fusion by addressing nonlinear deformations with 3D compensation strategies

Numerical Investigation of the Mechanism of Interfacial Dynamics of the Melt Pool and Defects During Laser Powder Bed Fusion

High-Resolution Inherent Strain Method Using Actual Layer Thickness in Laser Powder Bed Fusion Additive Manufacturing with Experimental Validations

Warpage Analysis and Control of Thin-Walled Structures Manufactured by Laser Powder Bed Fusion

The Influence of Standoff Variations on the Forming Accuracy in Laser Direct Metal Deposition

Effect of scanning tracks on the contour morphology and dimensional accuracy of the fine structure manufactured by laser powder bed fusion

An Optimized Scanning Strategy to Mitigate Excessive Heat-Accumulation Caused by Short Scanning-Lines in Laser Powder Bed Fusion Process

Deformation Prediction and Shape Compensation Model of Circular Channels Using Laser Powder Bed Fusion

Formation mechanism of pore defects and surface ripples under different process parameters via laser powder bed fusion by numerical simulation and experimental verification

Influence of scale effect on surface morphology in laser powder bed fusion technology

Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing

Formation Mechanism and Elimination Method of Joint Defects in Lattice Structures Printed by Metal Droplet Deposition Manufacturing