Improving hole quality of thick CFRP laminates through a laser-mechanical compound drilling process
Nengru Tao,Genyu Chen,Song Cai,Wenjun Fang,Zhengming Xiao
DOI: https://doi.org/10.1016/j.jmrt.2023.10.183
IF: 6.267
2023-10-28
Journal of Materials Research and Technology
Abstract:Conventional mechanical drilling of thick carbon fiber reinforced plastic (CFRP) composite laminates is prone to machining-induced defects such as burrs, delamination, and severe tool wear. However, pulsed laser drilling as an improved strategy results in hole taper and the formation of a heat-affected zone (HAZ). Herein, a new laser-mechanical composite drilling process is proposed, which combines the advantages of pulsed laser drilling for avoiding tool wear and twist drilling for achieving high dimensional accuracy, significantly improving the drilling quality of thick CFRP laminates. The evolution mechanism of the hole taper and HAZ with processing conditions in pulsed laser drilling is investigated. Furthermore, a theoretical model is established to reveal the material removal mechanism during the reaming process. The thrust force variation, drilling quality and tool wear are analyzed and verified by comparative experiments. The results show that due to the shielding effect from the surface materials, the maximum hole taper and HAZ at the hole exit reach up to 37.5° and 650 μm, respectively, which can be removed effectively by subsequent reaming operations. Due to its small amount of material removal, the peak thrust force and the average thrust force in laser-mechanical drilling are only 53.8 % and 37.6 % of the critical thrust force of delamination, respectively, which can effectively inhibit delamination. Compared with direct twist drilling, the average wear of the main cutting edge in laser-mechanical drilling is decreased by 60.87 %, which greatly reduces the size of the delamination by 55 %.
materials science, multidisciplinary,metallurgy & metallurgical engineering