Abstract:We conducted a study to investigate the impact of the laser direct metal deposition (LMD) process on the microstructure, mechanical properties, temperature fields, and stress fields of 24CrNiMo steel in order to determine the optimal process parameters. The optimal parameters were determined to be a laser power of 1400 W, scanning speed of 7 mm/s, and powder feed rate of 8 g/min. When these optimal parameters were used, the formed specimens exhibited a high densely of up to 97.5 %. The microstructure of the specimens formed different parameters primarily consisted of bainite, martensite and ferrite. The specimens formed under various process conditions demonstrated good toughness, with a maximum tensile strength of 1131±20 MPa and an elongation of 16±1.8 %. Additionally, there was little difference in wear resistance and wear morphology among the specimens formed under different processes. The predominant wear mechanisms include abrasive wear, adhesive wearand oxidative wear. Increasing laser power and decreasing scanning speed resulted in a gradual increase in the temperature gradient gradually, leading to higher residual stresses in the formed specimens. Longitudinal stresses concentrated on both sides of the deposited layer, while the transverse stresses concentrated on one side of the deposited layer. The simulation results of the temperature field and stress field were consistent with the experimental results, with errors within the range of 10 %–20 %. This study demonstrated that the simulated models of temperature and stress fields effectively captured the fundamental phenomena in the LMD process, providing valuable tools for predicting and optimizing temperature distribution and stress in the LMD process. These findings contribute to the understanding and enhancement of the LMD process for 24CrNiMo steel, making it applicable for various applications requiring superior microstructure and mechanical properties.

Self-Regulation-Effect in Laser Direct Metal Manufacturing

Surface Evenness Control of Laser Solid Formed Thin-Walled Parts Based on the Mathematical Model of the Single Cladding Layer Thickness

Research on process optimization and microstructure of CrCoNi medium-entropy alloy formed by laser metal deposition

Modeling of Temperature Field Evolution During Multilayered Direct Laser Metal Deposition

Investigation on layer variation behavior and process stability during direct laser deposition using a semi-theoretic analysis model

Mechanisms and influencing factors of defect formations during laser-based directed energy deposition with coaxial powder feeding: a review

An Overview of Laser Metal Deposition for Cladding: Defect Formation Mechanisms, Defect Suppression Methods and Performance Improvements of Laser-Cladded Layers

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

Coupling Characteristics of Powder and Laser of Coaxial Cone Nozzle for Laser Direct Metal Deposition: Numerical Simulation and Experimental Study

The Forming Control Method of Multi-Track Laser Cladding on Curved Surface

Research On Technics Of Laser Direct Metal Deposition Forming Technology

Quantitative analysis and experimental study of the influence of process parameters on the evolution of laser cladding

Research on the temperature control strategy of thin-wall parts fabricated by laser direct metal deposition

Laser direct metal deposition of variable width thin-walled structures in Inconel 718 alloy by coaxial powder feeding

Study on the Stability in Laser Cladding Forming Process of Thin-Wall Structures

Laser metal deposition of thin-walled parts of Al 0.8 CrFe 2 Ni 2 high-entropy alloy: Process window, microstructure, wear resistance and mechanical anisotropy

Effect of laser direct metal deposition process on the microstructure and mechanical properties and temperature and stress fields of 24CrNiMo

Effect of Processing Parameters on Thermal Phenomena in Direct Laser Metallic Powder Deposition

Influence of Process Parameters on Flatness During Single-Track Laser Cladding

Prediction and Verification of the Single Cladding Layer Thickness for Laser Solid Forming

Effect of scanning tracks on the contour morphology and dimensional accuracy of the fine structure manufactured by laser powder bed fusion