Abstract:For laser-melting deposition (LMD), a computational fluid dynamics (CFD) model was developed using the volume of fluid and discrete element modeling techniques. A method was developed to track the flow behavior, flow pattern, and driving forces of liquid flow. The developed model was compared with experimental results in the case of AISI 304 stainless steel single-track depositions on AISI 304 stainless steel substrate. A close correlation was found between experiments and modeling, with a deviation of 1–3%. It was found that the LMD involves the simultaneous addition of powder particles that absorb a significant amount of laser energy to transform their phase from solid to liquid, resulting in conduction-mode melt flow. The bubbles within the melt pool float at a specific velocity and escape from the melt pool throughout the deposition process. The pores are generated if the solid front hits the bubble before escaping the melt pool. Based on the simulations, it was discovered that the deposited layer’s counters took the longest time to solidify compared to the overall deposition. The bubbles strived to leave through the contours in an excess quantity, but became stuck during solidification, resulting in a large degree of porosity near the contours. The stream traces showed that the melt flow adopted a clockwise vortex in front of the laser beam and an anti-clockwise vortex behind the laser beam. The difference in the surface tension between the two ends of the melt pool induces “thermocapillary or Benard–Marangoni convection” force, which is insignificant compared to the selective laser melting process. After layer deposition, the melt region, mushy zone, and solidified region were identified. When the laser beam irradiates the substrate and powder particles are added simultaneously, the melt adopts a backwards flow due to the recoil pressure and thermocapillary or Benard–Marangoni convection effect, resulting in a negative mass flow rate. This study provides an in-depth understanding of melt pool dynamics and flow pattern in the case of LMD additive manufacturing technique.

Modeling of Temperature Field Evolution During Multilayered Direct Laser Metal Deposition

Improving the accuracy and reliability of temperature field simulation during laser metal deposition

Research on the temperature control strategy of thin-wall parts fabricated by laser direct metal deposition

Investigation of thermal behavior of powder stream and molten pool during laser-based directed energy deposition

Effect of Processing Parameters on Thermal Phenomena in Direct Laser Metallic Powder Deposition

Nonlinear thermal simulation of laser metal deposition

Evolution of melt pool motion and temperature field based on powder scale modeling during laser directed energy deposition process

Investigation of thermal and fluid dynamics behaviors of melt pool during laser direct metal deposition on inclined substrates

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

Multi-scale Modelling of Solidification and Microstructure Evolution in Laser-Deposition of T15 High Speed Steel

Thermal-fluid dynamic behavior and its effect on particle distribution and solidification characterization during the laser melting deposition of Ti-based composites

Role of angular velocity on Marangoni convection shifting, heat accumulation, and microstructure evolution using laser directed energy deposition

Modeling on Molten Pool Transport in Laser Deposition Processes by Lattice Boltzmann Method

WHOLE-PROCESS CROSS-SCALE MODELLING OF LASER DIRECT DEPOSITION WITH SEMI-RESOLVED VOF-DEM COUPLING

Thermal behavior and microstructure evolution mechanism of W-20%Fe alloy fabricated by laser metal deposition

Numerical Simulation of Transient Multiphase Field During Hybrid Plasma-Laser Deposition Manufacturing

The Thermo-Mechanical Coupling Effect in Selective Laser Melting of Aluminum Alloy Powder

Thermal behavior and fluid dynamics within molten pool during laser inside additive manufacturing of 316L stainless steel coating on inner surface of steel tube

Mesoscopic Computational Fluid Dynamics Modelling for the Laser-Melting Deposition of AISI 304 Stainless Steel Single Tracks with Experimental Correlation: A Novel Study

Investigation of molten pool geometry and flow field based on powder-scale modeling in laser directed energy deposition

Numerical simulation of powder effect on solidification in directed energy deposition additive manufacturing