Abstract:Bulk-form nanocomposites of TiC-reinforced 316L stainless steel matrix were fabricated by selective laser melting (SLM), an emerging powder-bed additive manufacturing technique which allows the direct fabrication of usable end-products, using various volumetric laser energy densities (a). The microstructural features of the distribution and sizes of TiC nanoparticles, as well as the grain sizes and tribological performances of the SLMprocessed nanocomposite parts, were sensitive to the applied eta. Increasing eta enhanced the dispersion state of nanoscale TiC owing to intensified Marangoni flow and the corresponding capillary force, which prevented TiC aggregation and promoted a uniform dispersion of reinforcements in the solidified matrix. However, with increasing eta, the TiC particle size also increased, and some nanoparticles lost their initial nanostructure because of significant thermal accumulation within the molten pool. Increasing eta also caused increases in the grain sizes of the fabricated nanocomposite because of the decreasing cooling rate. A simulation model was developed to enhance understanding of the manufacturability of these new materials, as well as to predict the temperature evolution and thermal behaviors of the molten pool under various eta. The simulation modeled the effects of various eta values on the temperature distribution evolutions and the corresponding effects of Marangoni convection during the SLM process. The temperature distribution was significantly influenced by the applied a; the maximum temperature gradient within the molten pool was increased significantly with increased a. The simulation results validated the experimental results and the underlying physical mechanism of the molten pool. The microhardness of the SLM nanocomposite decreased sharply with increased grain size due to the lower cooling rate, but increased with further increases in eta because of the enhanced densification degree. Nanocomposites processed under the optimum condition of eta = 200 J/mm(3) showed the lowest wear rates accompanied by the formation of adherent and strain-hardened tribolayers on the worn surfaces of the nano composites, suggesting improved tribological performance.

Thermal-fluid dynamic behavior and its effect on particle distribution and solidification characterization during the laser melting deposition of Ti-based composites

Thermal evolution behavior and fluid dynamics during laser additive manufacturing of Al-based nanocomposites: Underlying role of reinforcement weight fraction

A Thermo-Metallurgical-mechanical Model for Selective Laser Melting of Ti6Al4V

Solidification Microstructure Prediction of Ti-6Al-4V Alloy Produced by Laser Melting Deposition

Fluid Thermodynamic Simulation of Ti-6Al-4V Alloy in Laser Wire Deposition

Effect of Processing Parameters on Thermal Phenomena in Direct Laser Metallic Powder Deposition

Mesoscopic Study of Thermal Behavior, Fluid Dynamics and Surface Morphology During Selective Laser Melting of Ti-based Composites

Investigation of thermal behavior of powder stream and molten pool during laser-based directed energy deposition

Influence of Thermal Behavior along Deposition Direction on Microstructure and Microhardness of Laser Melting Deposited Metallic Parts

Multi-physics simulation of non-equilibrium solidification in Ti-Nb alloy during selective laser melting

Modeling on Molten Pool Transport in Laser Deposition Processes by Lattice Boltzmann Method

Modeling of Temperature Field Evolution During Multilayered Direct Laser Metal Deposition

Thermal Behavior of the Molten Pool, Microstructural Evolution, and Tribological Performance During Selective Laser Melting of TiC/316L Stainless Steel Nanocomposites: Experimental and Simulation Methods

Finite Element Analysis of Thermal Behavior and Experimental Investigation of Ti6Al4V in Selective Laser Melting

Numerical simulation of melt pool size and flow evolution for laser powder bed fusion of powder grade Ti6Al4V

Effect of Laser Beam Profile on Thermal Transfer, Fluid Flow and Solidification Parameters during Laser-Based Directed Energy Deposition of Inconel 718

Investigation of thermal and fluid dynamics behaviors of melt pool during laser direct metal deposition on inclined substrates

Melting and solidification dynamics during laser melting of reaction-based metal matrix composites uncovered by in-situ synchrotron X-ray diffraction

Thermal-fluid behavior, microstructure and mechanical properties in liquid bridge transfer mode during directed energy deposition-arc additive manufacturing – Insights using NiTi as a model alloy

Thermal behavior and microstructure evolution mechanism of W-20%Fe alloy fabricated by laser metal deposition

Role of angular velocity on Marangoni convection shifting, heat accumulation, and microstructure evolution using laser directed energy deposition