Abstract:The laser hot-wire (LHW) process has the potential to deposit material at high rates using low laser power. An LHW experiment was designed to be able to deposit material at the rate of 3.46 kg per hour with less than 10 kW of laser power. Four thermocouples were built into the substrate to record the temperature variation during the deposition. The results show that temperature fluctuates in a periodic manner with the deposition layer by layer. Simultaneously, the distortion of the substrate was measured. The substrate is distorted, and the maximum distortion increases gradually during deposition.The equivalent heat conduction coefficient for heat convection in the molten pool is discussed. It becomes apparent that the heat convection of flowing molten metal is 3-5 times that of molten metal at rest. The absorptivity of laser power was determined by comparison between the simulation and a one-pass cladding experiment. The absorptivity of laser power is approximately 15% in this experiment.Numerical simulation of LHW additive manufacturing was conducted to obtain the temperature, stress and strain fields, and the distortion. The outstanding features for numerical simulation are additive geometry and numerous analysis steps. The INP files of ABAQUS are compiled in a Matlab program because of the considerable number of steps and element definitions. Temperature variation and substrate distortion are both measured to validate the FEA model. The verification result indicates that the LHW model is feasible and accurate.The maximum residual stress is located in the junction between the deposit and substrate when the deposition is finished. This junction area becomes the most likely crack position. Deposited material undergoes complicated thermal cycles during the LHW process. Temperature variation determines the phase transformation. The microstructure change of the heat affected zone was analyzed on the basis of computational temperature variation. Such interpretation can effectively explain softened area in the heat affected zone of the substrate. A numerical computation method is used to map the processing window of stable hot-wire deposition. It is shown that the stable deposition has top and bottom limitations under a certain current intensity and wire feed speed. (C) 2016 Elsevier B.V. All rights reserved.

Comprehensive modeling of transport phenomena in laser hot-wire deposition process

Multi-Phase Flow Modelling Of Laser Cladding Process With T15 High Speed Steel Particles

Modeling on Molten Pool Transport in Laser Deposition Processes by Lattice Boltzmann Method

Experimental Study and Modeling of H13 Steel Deposition Using Laser Hot-Wire Additive Manufacturing

Multicomponent Multiphase Modeling of Dissimilar Laser Cladding Process with High-Speed Steel on Medium Carbon Steel

Thermal-fluid dynamic behavior and its effect on particle distribution and solidification characterization during the laser melting deposition of Ti-based composites

Three-Dimensional Transient Simulation of Laser Deep-penetration Welding Based on Combined Heat Source

Modeling and numerical studies of high-precision laser powder bed fusion

Modeling of Temperature Field Evolution During Multilayered Direct Laser Metal Deposition

Role of angular velocity on Marangoni convection shifting, heat accumulation, and microstructure evolution using laser directed energy deposition

Effect of Laser Beam Profile on Thermal Transfer, Fluid Flow and Solidification Parameters during Laser-Based Directed Energy Deposition of Inconel 718

Simulation and experimental study on temperature field and flow field of laser cladding high-temperature Ni-based alloys

WHOLE-PROCESS CROSS-SCALE MODELLING OF LASER DIRECT DEPOSITION WITH SEMI-RESOLVED VOF-DEM COUPLING

Modeling of the Flow Field and Clad Geometry of a Molten Pool during Laser Cladding of CoCrCuFeNi High-Entropy Alloys

Numerical simulation and experimental study on the evolution of multi-field coupling in laser cladding process by disk lasers

Mesoscopic simulation of surface morphology and thermodynamic mechanism during laser powder-bed fusing Ni-based composite: Underlying role of WC weight fraction

Numerical simulation of heat and mass transfer in laser directed energy deposition

Numerical simulation method of the multi-field coupling mechanism for laser cladding 316L powder

Research on heat and mass transfer in the molten pool of laser cladding

Three-dimensional numerical simulation of arc and metal transport in arc welding based additive manufacturing

Multi-scale Modelling of Solidification and Microstructure Evolution in Laser-Deposition of T15 High Speed Steel