Abstract:For laser-melting deposition (LMD), a computational fluid dynamics (CFD) model was developed using the volume of fluid and discrete element modeling techniques. A method was developed to track the flow behavior, flow pattern, and driving forces of liquid flow. The developed model was compared with experimental results in the case of AISI 304 stainless steel single-track depositions on AISI 304 stainless steel substrate. A close correlation was found between experiments and modeling, with a deviation of 1–3%. It was found that the LMD involves the simultaneous addition of powder particles that absorb a significant amount of laser energy to transform their phase from solid to liquid, resulting in conduction-mode melt flow. The bubbles within the melt pool float at a specific velocity and escape from the melt pool throughout the deposition process. The pores are generated if the solid front hits the bubble before escaping the melt pool. Based on the simulations, it was discovered that the deposited layer’s counters took the longest time to solidify compared to the overall deposition. The bubbles strived to leave through the contours in an excess quantity, but became stuck during solidification, resulting in a large degree of porosity near the contours. The stream traces showed that the melt flow adopted a clockwise vortex in front of the laser beam and an anti-clockwise vortex behind the laser beam. The difference in the surface tension between the two ends of the melt pool induces “thermocapillary or Benard–Marangoni convection” force, which is insignificant compared to the selective laser melting process. After layer deposition, the melt region, mushy zone, and solidified region were identified. When the laser beam irradiates the substrate and powder particles are added simultaneously, the melt adopts a backwards flow due to the recoil pressure and thermocapillary or Benard–Marangoni convection effect, resulting in a negative mass flow rate. This study provides an in-depth understanding of melt pool dynamics and flow pattern in the case of LMD additive manufacturing technique.

Multi-scale Modelling of Solidification and Microstructure Evolution in Laser-Deposition of T15 High Speed Steel

Modeling of rapid solidification in Laser Powder Bed Fusion processes

Prediction of microstructure in laser powder bed fusion process

Modelling of Microstructure Evolution during Laser Processing of Intermetallic Containing Ni-Al Alloys

Multi-Phase Flow Modelling Of Laser Cladding Process With T15 High Speed Steel Particles

3D Modeling of the Solidification Structure Evolution and of the Inter Layer/Track Voids Formation in Metallic Alloys Processed by Powder Bed Fusion Additive Manufacturing

Three-dimensional non-isothermal phase-field modeling of microstructure evolution during selective laser sintering

Modeling of Temperature Field Evolution During Multilayered Direct Laser Metal Deposition

Towards a process-structure model for Ti-6Al-4V during additive manufacturing

Multi-physics simulation of non-equilibrium solidification in Ti-Nb alloy during selective laser melting

Thermo-physical phase field model of laser powder melting additive manufacturing of 2D layered stainless steel structures

Solidification Microstructure Prediction of Ti-6Al-4V Alloy Produced by Laser Melting Deposition

Laser Powder Bed Fusion of Titanium Aluminides: An Investigation on Site-Specific Microstructure Evolution Mechanism

Optimizing solidification dendrites and process parameters for laser powder bed fusion additive manufacturing of GH3536 superalloy by finite volume and phase-field method

Integrating Phase Field Modeling and Machine Learning to Develop Process-Microstructure Relationships in Laser Powder Bed Fusion of IN718

Modeling and numerical studies of high-precision laser powder bed fusion

Laser Metal Deposition of Rene 80—Microstructure and Solidification Behavior Modelling

Mesoscopic Computational Fluid Dynamics Modelling for the Laser-Melting Deposition of AISI 304 Stainless Steel Single Tracks with Experimental Correlation: A Novel Study

Multiscale Modeling of Microstructural Evolution in Fused-Coating Additive Manufacturing

Revealing Multiphysics Effects on Microstructure Characteristics in Powder-Fed Laser Cladding Based on a Comprehensive Model

Multi-scale Modeling of Liquid-Metal Cooling Directional Solidification and Solidification Behavior of Nickel-Based Superalloy Casting