Abstract:The trade-off between strength and ductility remains a significant challenge for high-entropy alloys (HEAs). The layer-by-layer printing manner inherent in the laser powder bed fusion (L-PBF) leads to distinctive microstructures in alloys, in turn yielding unexpected performances that are promising for resolving this contradiction. At present, the influence of L-PBF technology on the microstructures and mechanical properties of near-eutectic HEAs has yet to be explored. In the present work, a metastable AlCo 0.4 CrFeNi 2.7 hypoeutectic HEA with an extraordinary strength-ductility combination was successfully fabricated using L-PBF. The precipitation behaviors and mechanical properties of the alloy were further modulated through annealing. The results reveal that the high cooling rates inherent in L-PBF promote the formation of a "pseudoeutectic" structure featuring the face-centered-cubic (FCC) + body-centered-cubic (BCC) dual-phase nanolamellae. Furthermore, after annealing at 600-750 °C, the L1 2 and B2 precipitates are generated in the FCC lamellae, accompanied by a coarsening of the original Cr-rich precipitates (BCC) in the BCC lamellae. The as-printed sample exhibits remarkable mechanical properties, posing a yield strength of 1007 MPa, an ultimate strength of 1249 MPa, and a total elongation of ∼25.1%. After annealing at 750 °C, the tensile yield strength and ultimate strength are further increased to 1201 MPa and 1512 MPa, respectively, while the elongation is maintained at ~15.1%. The analysis results demonstrate that the high strength originates from the hard BCC lamellae and nanolamellar interfaces, while the good ductility stems from the soft FCC lamellae and coordinated deformation of the dual-phase nanolamellae. Furthermore, the strength increase is further substantiated through the introduction of annealing-induced nanoprecipitates, thereby contributing to additional precipitation strengthening.

Laser metal deposition of thin-walled parts of Al 0.8 CrFe 2 Ni 2 high-entropy alloy: Process window, microstructure, wear resistance and mechanical anisotropy

Strain hardening and strengthening mechanism of laser melting deposition (LMD) additively manufactured FeCoCrNiAl0.5 high-entropy alloy

Enhancing the Strength of AlCrFeNi HEAs Via Tailoring Aluminum Content and Optimal Aging Treatment

Hot cracking, crystal orientation and compressive strength of an equimolar CoCrFeMnNi high-entropy alloy printed by selective laser melting

Effects of Process Parameters on Microstructures and Tensile Properties of Laser Melting Deposited CrMnFeCoNi High Entropy Alloys

Microstructure Evolution and Wear Resistance of the Eutectic High-Entropy Alloy Al0.3CoCrFeNiNb0.5 Produced by Laser Metal Deposition

Effects of Laser Powers on Microstructures and Mechanical Properties of Al0.5FeCoCrNi High-Entropy Alloys Fabricated by Laser Melting Deposition

Microstructure evolution and mechanical properties of Al CoCrFeNi high-entropy alloys by laser melting deposition

A Study of the Microstructure and Mechanical and Electrochemical Properties of CoCrFeNi High-Entropy Alloys Additive-Manufactured Using Laser Metal Deposition

Selective Laser Melting (SLM) Additively Manufactured CoCrFeNiMn High-Entropy Alloy: Process Optimization, Microscale Mechanical Mechanism, and High-Cycle Fatigue Behavior

Additive manufacturing of Al0.3CoCrFeNi high-entropy alloy by powder feeding laser melting deposition

Selective laser melting of the Al0.3CoCrFeNiCu high-entropy alloy: Processing parameters, microstructure and mechanical properties

Significant transitions of microstructure and mechanical properties in laser additive manufacturing AlCoCrFeNi 2.1 eutectic high-entropy alloy under heat treatment

Laser additively manufactured crack-free aluminum-bearing high entropy alloys: alloy design, synthesis, cracking inhibition and microstructure evolution effects on their tensile properties

Surface modification for AlCoCrFeNi2.1 eutectic high-entropy alloy via laser remelting technology and subsequent aging heat treatment

Understanding Mechanical Characteristics of FeNiCrCoCu HEA in Nanoscale Laser Powder Bed Fusion via Molecular Dynamics

Microstructures and precipitation behaviors of a hypoeutectic high-entropy alloy prepared by laser powder bed fusion

Effect of Grain Orientation on Microstructure and Mechanical Properties of FeCoCrNi High-Entropy Alloy Produced via Laser Melting Deposition

Research on the laser melting coating process of an AlCoCrFeNi high‐entropy alloy

Mechanical, materials, and physicochemical effects on the high-temperature tribological behaviour of laser additive manufacturing AlCoCrFeNi2.1 eutectic high-entropy alloys

Microstructural origins of enhanced work hardening and ductility in laser powder-bed fusion 3D-printed AlCoCrFeNi 2.1 eutectic high-entropy alloys