Abstract:To improve the accuracy and response time of closed-loop control of laser solid forming (LSF) process, it is important to master the effects of processing parameters on the deposition dimensions and mechanical parameters. In this paper, the influences of processing parameters, such as laser power, traverse speed, laser spot diameter, powder feeding rate, shielding gas flow rate on the deposition dimension parameters were investigated. It is found that the deposition height is mainly affected by the mass input of molten pool, namely, powder feeding rate and traverse velocity, especially the powder feeding rate. And the deposition width is mainly affected by the energy input such as, spot diameter, traverse speed and the energy density, among which the spot diameter and traverse speed are of greater influence. A series of transfer functions were built to quantitatively correlate the dependence of deposition layer dimension parameters on the processing parameters. The transfer function model shows a good agreement with the experimental results.To improve the accuracy and response time of closed-loop control of laser solid forming (LSF) process, it is important to master the effects of processing parameters on the deposition dimensions and mechanical parameters. In this paper, the influences of processing parameters, such as laser power, traverse speed, laser spot diameter, powder feeding rate, shielding gas flow rate on the deposition dimension parameters were investigated. It is found that the deposition height is mainly affected by the mass input of molten pool, namely, powder feeding rate and traverse velocity, especially the powder feeding rate. And the deposition width is mainly affected by the energy input such as, spot diameter, traverse speed and the energy density, among which the spot diameter and traverse speed are of greater influence. A series of transfer functions were built to quantitatively correlate the dependence of deposition layer dimension parameters on the processing parameters. The transfer function model shows a good agr...

Investigation on layer variation behavior and process stability during direct laser deposition using a semi-theoretic analysis model

Thermal and Mechanical Variation Analysis on Multi-Layer Thin Wall during Continuous Laser Deposition, Continuous Pulsed Laser Deposition, and Interval Pulsed Laser Deposition

Study on the Stability in Laser Cladding Forming Process of Thin-Wall Structures

Study on Evolution Behavior of Geometrical Accuracy Based on Dynamic Characteristics of Molten Pool in Laser-based Direct Energy Deposition

Self-Regulation-Effect in Laser Direct Metal Manufacturing

Numerical and Experimental Study on the Profile of Metal Alloys Formed on the Inclined Substrate by Laser Cladding

Process optimization of laser hot-wire cladding with high-power direct diode laser via the response surface methodology

Analytical Modeling and Experimental Investigation of Laser Clad Geometry

Modeling And Analysis On The Geometric Characteristics Of Laser Cladding Layer

The Influence of Standoff Variations on the Forming Accuracy in Laser Direct Metal Deposition

Quantitative analysis and experimental study of the influence of process parameters on the evolution of laser cladding

Evaluating Clad Formations in Directed Energy Deposition Process Using a Dimensionless Analysis

Modeling of Temperature Field Evolution During Multilayered Direct Laser Metal Deposition

Interplay between powder catchment efficiency and layer height in self-stabilized laser metal deposition

Model of layer thickness of thin-walled parts in laser metal direct manufacturing

Effect of Processing Parameters on Thermal Phenomena in Direct Laser Metallic Powder Deposition

Research on the predictive geometric characteristics model of laser cladding layer

Process Mechanisms Based on Powder Flow Spatial Distribution in Direct Metal Deposition

Investigation of thermal behavior of powder stream and molten pool during laser-based directed energy deposition

Prediction and Verification of the Single Cladding Layer Thickness for Laser Solid Forming

Processing Parameters Study of Closed-Loop Laser Solid Forming