Abstract:The growing need for high-performance components in terms of shape and mechanical properties encourages the adoption of integrated technological solutions. In the present work, a novel methodology for affecting the superplastic behaviour and, in turn, the thickness distribution of magnesium alloy components is proposed. Through heat treatments using a CO 2 laser, the grain size was locally changed, thus modifying the superplastic behaviour in a predefined area of the blank. Both the grain coarsening produced by the laser heat treatment and the superplastic forming of the heat treated blank were simulated using a finite element model, which allowed to set the related process parameters for the manufacturing of the investigated case study (a truncated cone). The thermal finite element model of the laser heat treatment, calibrated using the experimental temperature evolutions acquired in specific areas during the heat treatment, was used to evaluate the influence of process parameters on the grain size evolution. The laser heat treatment was able to significantly promote the grain growth, increasing the mean grain size from about 8 μm to twice (about 17 μm). The resulting grain size distributions were implemented in the mechanical finite element model of the superplastic forming process and the combination of laser parameters which allowed to obtain the most uniform thickness distribution on the final component was finally experimentally reproduced and measured for validation purposes. Even in the case of the laboratory scale application, characterised by quite small dimensions, the proposed approach revealed to be effective, to improving the thinning factor ( t MIN / t AVG ) of the formed part from 0.85 to 0.89, and providing an increase in the thickness uniformity of about 4.7%.

Experimental and computational appraisal of the shape accuracy of a thin-walled virole aero-engine casing manufactured by means of laser metal deposition

Effect of Interlayer Cooling Time, Constraint and Tool Path Strategy on Deformation of Large Components Made by Laser Metal Deposition with Wire

Improving the accuracy and reliability of temperature field simulation during laser metal deposition

The Influence of Laser Power and Scan Speed on the Dimensional Accuracy of Ti6Al4V Thin-Walled Parts Manufactured by Selective Laser Melting

Laser Metal Deposition of Rene 80—Microstructure and Solidification Behavior Modelling

Modeling of Temperature Field Evolution During Multilayered Direct Laser Metal Deposition

Nonlinear thermal simulation of laser metal deposition

Combination of topology and shape optimization with finite element modeling in the case of an aerospace component produced by laser based additive manufacturing

Low-Defect AM of High Strength Aluminium Alloy by LMD

Surface based variable thickness slicing modeling for laser metal deposition

CFD modeling for predicting imperfections in laser welding and additive manufacturing of aluminum alloys

Numerical and experimental investigation of the geometry dependent layer-wise evolution of temperature during laser powder bed fusion of Ti–6Al–4V

Laser Metal Deposition of Ti6Al4V—A Brief Review

An Investigation of Thermomechanical Behavior in Laser Hot Wire Directed Energy Deposition of NAB: Finite Element Analysis and Experimental Validation

Numerical Investigation of Thermocapillary-Induced Deposited Shape in Fused-Coating Additive Manufacturing Process of Aluminum Alloy

Geometrical study of 5356 aluminium alloy by means of a concentric wire laser metal deposition

Effect of Thermal Deformation on Part Errors in Metal Powder Based Additive Manufacturing Processes

Laser metal deposition of thin-walled parts of Al 0.8 CrFe 2 Ni 2 high-entropy alloy: Process window, microstructure, wear resistance and mechanical anisotropy

Laser Operating Windows Prediction in Selective Laser-Melting Processing of Metallic Powders: Development and Validation of a Computational Fluid Dynamics-Based Model

Numerical/experimental investigation of the effect of the laser treatment on the thickness distribution of a magnesium superplastically formed part

A Thermo-Mechanical Analysis of Laser Hot Wire Additive Manufacturing of NAB