Abstract:(100) Oriented Pb x Sr1−x TiO3 (PSTO) thin films are prepared on indium tin oxide (ITO)/glass substrates by sol–gel technique while inserting doped PbTiO3 (PTO)-inducing layer in between. The effect of tensile stress in PSTO on tunability and (100) orientation of the thin films was investigated using X-ray diffraction, scanning electron microscopy, transmission electron microscope, and atomic force microscope, respectively. Results show that PSTO thin film deposited on doped PTO has (100) oriented structure while it is randomly oriented when deposited directly on the ITO/glass substrate. Lattice mismatch between PSTO and PTO appears, in which the in-plane lattice constant c is 0.3922–0.3924 nm in the former and 4.02–4.07 nm in the latter, respectively, contributing tensile stress in the PSTO due to different lattice constants between them. The stress in the PSTO thin film is 3.04, 3.15, 3.59 and 4.47 GPa when the doped PTOs are Fe–PTO, Tb–PTO, Co–PTO and Zn–PTO, respectively. The orientation degrees of PSTO thin films are from 89.63, 90.31, 91.92 to 93.29 % with increasing stress of PSTO on Fe–PTO, Tb–PTO, Co–PTO and Zn–PTO, respectively. Tunabilities of the well-oriented PSTO thin films increase in ascending order of 63 < 65 < 69 < 73 % when induced by oriented PTO layers of Fe–PTO, Tb–PTO, Co–PTO and Zn–PTO, respectively, which is in accordance with the degree of (100) orientation appearing in the thin films. The high tunability appears in the PSTO thin film while high (100) orientation is derived from the tensile stress. It is much higher than that of randomly oriented PSTO thin film.

Orientation Control in Sol–Gel‐Derived BiScO3–PbTiO3 Thin Films

Characterization of (100)-Oriented BiScO3–PbTiO3 Thin Films Synthesized by a Modified Sol-Gel Method

Crystallographic Orientation Dependence of Dielectric Response in Lead Strontium Titanate Thin Films

Preferred orientation controlling of PZT (52–48) thin films prepared by sol–gel process

Control of Tensile Stress on Inducing Formation and Tunability of (100) Oriented Pb X Sr1−x TiO3 Thin Films

Fabrication and Properties of Sol–Gel‐Derived BiScO3–PbTiO3 Thin Films

Manipulation of phase transitions and electrical properties of Ba<sub>1-x</sub>Sr<sub>x</sub>TiO<sub>3</sub> thin films through orientation engineering

Effect of PbO seeding layers on the structure and properties of the sol-gel-derived BiScO3-PbTiO3 thin films

Epitaxial Growth of Sol-Gel Derived BiScO3–PbTiO3 Thin Film on Nb-doped SrTiO3 Single Crystal Substrate

The oriented growth of PbTiO3 thin films deposited by a sol-gel process on substrates without lattice match

Structure and Electrical Properties of (100)-Oriented BiSc1/2Fe1/2O3–PbTiO3 Thin Films with Different Thickness Via Sol–gel Method

Phase compositions and ferroelectric properties of Pb(Zr0.52,Ti0.48)O3 thin films with different highly orientations prepared by a sol–gel route

Investigation of Thickness Dependence of Structure and Electric Properties of Sol-Gel-Derived BiScO3-PbTiO3 Thin Films: Investigation of Properties of BiScO3-PbTiO3 Thin Films

Hybrid Influences of Defect Dipole and Intrinsic Inducing Field on Orientation of PbTiO3 Thin Film Deposited on Indium Tin Oxide/glass Substrate

Controlling Crystal Orientation in Zeolite MFI Thin Films by Direct In Situ Crystallization

Mechanical Properties of Sol-Gel Derived BiScO3–PbTiO3 Thin Films by Nanoindentation

Preparation and Characterization of Sol–gel Derived (100)-Textured Pb(Zr,Ti)O3 Thin Films: PbO Seeding Role in the Formation of Preferential Orientation

Preparation and structure of preferentially oriented PbTiO3 glass-ceramic thin films by sol-gel process

Effect of Tb3+ Doping on the Preferred Orientation of Lead Titanate Thin Film Prepared by Sol–gel Method on ITO/glass Substrates

Effect of Crystal Orientation on the Phase Diagrams, Dielectric and Piezoelectric Properties of Epitaxial BaTiO3 Thin Films

Characterization of (100)-Oriented 0.63bimg1/2ti1/2o3–0.37pbtio3 Piezoelectric Films by a Sol–gel Process