Abstract:We demonstrate 40 Gb/s all-optical clock recovery by using a monolithic integrated amplified-feedback laser (AFL) with coherent injection-locked method. The AFL consists of a gain-coupled DFB laser and an optical amplified feedback external cavity. With proper design and operation of AFL, the device can work at self-pulsation state that resulted from the beating between two lasing modes. The self-pulsation can be injection-locked to the optical clock embedded in input data streams. Due to different work mechanisms, there are two all-optical clock recovery operation modes: incoherent injection-locked and coherent injection-locked. It's predicted that the coherent injection method has various advantages: 1) requiring low injection power recovery, 2) independent of the bit rate and 3) introducing little timing jitter to the recovered clock. The robustness of coherent clock recovery is confirmed by our experimental results. We set up a return-to-zero (RZ) pseudorandom binary sequence (PRBS) data streams all-optical clock recovery system. This coherent injection-locked based clock recovery method is optical signal noise ratio (OSNR) and chromatic dispersion (CD) degeneration tolerant, and has low timing jitter and high sensitivity.

A novel approach for clock recovery without pattern effect from degraded signal

Clock recovery from degraded signals at high repetition rates using a two-ring injection mode-locked fiber ring laser

Optical clock recovery with dual-wavelength output from degraded RZ and NRZ signals

Novel approach to reduce the pattern effect in 10-Gb/s clock recovery

All-optical Subharmonic Clock Recovery Using an Injected Mode-locked Fiber Ring Laser

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

A Novel All-Optical Clock Recovery Experiment for Extracting Clock Signal from OTDM Signal

All-Optical, Bit-Rate Tunable Clock Recovery For Nrz-Ask Signals

100 Gb/s All-Optical Clock Recovery Based on a Monolithic Dual-Mode DBR Laser

40Gbits/s All-Optical Clock Recovery for Degraded Signals Using an Amplified Feedback Laser

A Novel Technology to Reduce the Pattern Effect in All-Optical Clock Recovery Using Injected Mode-Locked Laser Based on Soa

All Optical Clock Recovery from Degraded Non-Return-to-Zero Data Stream

Experimental Demonstration Of An All-Optical Clock And Data Recovery Technology For 10 Gb/S Nrz-Dpsk Signals

All-optical clock recovery using a ridge width varied two-section partly gain-coupled DFB self-pulsation laser

Clock Recovery for OTDM and 3R Regeneration

Comb-like Filter Preprocessing to Reduce the Pattern Effect in the Clock Recovery Based on SOA

Multiwavelength All-Optical Clock Recovery of Non-Return-To-Zero Data

All-Optical Clock Recovery From 40 Gbit/S Rz Signal Based On Microring Resonators

All-Optical Clock Recovery from Non-Return to Zero Data Stream Based on Semiconductor Optical Amplifier and Stimulated Brillouin Scattering

Influence Factors of an All-Optical Recovered Clock from Two-Section Dfb Lasers

A Simple Method for Clock Recovery