Abstract:We demonstrate 40 Gb/s all-optical clock recovery by using a monolithic integrated amplified-feedback laser (AFL) with coherent injection-locked method. The AFL consists of a gain-coupled DFB laser and an optical amplified feedback external cavity. With proper design and operation of AFL, the device can work at self-pulsation state that resulted from the beating between two lasing modes. The self-pulsation can be injection-locked to the optical clock embedded in input data streams. Due to different work mechanisms, there are two all-optical clock recovery operation modes: incoherent injection-locked and coherent injection-locked. It's predicted that the coherent injection method has various advantages: 1) requiring low injection power recovery, 2) independent of the bit rate and 3) introducing little timing jitter to the recovered clock. The robustness of coherent clock recovery is confirmed by our experimental results. We set up a return-to-zero (RZ) pseudorandom binary sequence (PRBS) data streams all-optical clock recovery system. This coherent injection-locked based clock recovery method is optical signal noise ratio (OSNR) and chromatic dispersion (CD) degeneration tolerant, and has low timing jitter and high sensitivity.

A Novel Technology to Reduce the Pattern Effect in All-Optical Clock Recovery Using Injected Mode-Locked Laser Based on Soa

Novel approach to reduce the pattern effect in 10-Gb/s clock recovery

A novel approach for clock recovery without pattern effect from degraded signal

Comb-like Filter Preprocessing to Reduce the Pattern Effect in the Clock Recovery Based on SOA

A Novel All-Optical Clock Recovery Experiment for Extracting Clock Signal from OTDM Signal

A Simple Method for Clock Recovery

All-Optical, Bit-Rate Tunable Clock Recovery For Nrz-Ask Signals

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

Optimizing Clock Enhancement to Achieve Modulation-Format-Independent All-Optical Clock Recovery

All-optical Subharmonic Clock Recovery Using an Injected Mode-locked Fiber Ring Laser

All-optical frequency multiplication/recovery based on the semiconductor optical amplifier ring cavity

Using Signal Pre-Distortion to Enhance the Performance of All-Optical Clock Recovery

Combination of Comb-Like Filter and SOA for Preprocessing to Reduce the Patten Effect in the Clock Recovery

Influence Factors of an All-Optical Recovered Clock from Two-Section Dfb Lasers

All-Optical Clock-Division Operation Using A Mode-Locked Fiber Laser Based on the Slow Carrier Recovery Rate of Soa

All optical clock division and multiplication by injection mode-locked laser based on SOA

Optical clock recovery with dual-wavelength output from degraded RZ and NRZ signals

All-optical Clock Division with Mode-Locked Figure-Eight Laser Based on the Slow Carrier Recovery Rate in Semiconductor Optical Amplifier

Low-timing-jitter all-optical clock recovery for 40 Gbits/s RZ-DPSK and NRZ-DPSK signals using a passively mode-locked quantum-dot Fabry-Perot semiconductor laser

All-optical Clock Recovery Using Parallel Ridge-Width Varied DFB Lasers Integrated with Y-branch Waveguide Coupler