Abstract:We demonstrate 40 Gb/s all-optical clock recovery by using a monolithic integrated amplified-feedback laser (AFL) with coherent injection-locked method. The AFL consists of a gain-coupled DFB laser and an optical amplified feedback external cavity. With proper design and operation of AFL, the device can work at self-pulsation state that resulted from the beating between two lasing modes. The self-pulsation can be injection-locked to the optical clock embedded in input data streams. Due to different work mechanisms, there are two all-optical clock recovery operation modes: incoherent injection-locked and coherent injection-locked. It's predicted that the coherent injection method has various advantages: 1) requiring low injection power recovery, 2) independent of the bit rate and 3) introducing little timing jitter to the recovered clock. The robustness of coherent clock recovery is confirmed by our experimental results. We set up a return-to-zero (RZ) pseudorandom binary sequence (PRBS) data streams all-optical clock recovery system. This coherent injection-locked based clock recovery method is optical signal noise ratio (OSNR) and chromatic dispersion (CD) degeneration tolerant, and has low timing jitter and high sensitivity.

Optimizing Clock Enhancement to Achieve Modulation-Format-Independent All-Optical Clock Recovery

Using Signal Pre-Distortion to Enhance the Performance of All-Optical Clock Recovery

All-Optical, Bit-Rate Tunable Clock Recovery For Nrz-Ask Signals

Low-Phase-Noise Clock Recovery from NRZ Signal and Simultaneous NRZ-to-RZ Format Conversion

All-optical High Performance Microwave Oscillator with Enhanced Modulation Efficiency Based on SOAs

100-GHz wavelength-tunable all-optical clock recovery with Fabry-Perot filter and semiconductor optical amplifier

A Simple Method for Clock Recovery

Experimental Demonstration Of An All-Optical Clock And Data Recovery Technology For 10 Gb/S Nrz-Dpsk Signals

Optical clock recovery with dual-wavelength output from degraded RZ and NRZ signals

All-Optical Clock Recovery From 40 Gbit/S Rz Signal Based On Microring Resonators

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

Simultaneous Prescaled and Frequency-Doubled Clock Recovery Using an Injection-Locked Optoelectronic Oscillator

Effective Optical Clock Recovery and Simultaneous Fourfold Demultiplexing of Otdm Signal Using an Optoelectonic Oscillator

40Gbits/s All-Optical Clock Recovery for Degraded Signals Using an Amplified Feedback Laser

100-Ghz All-Optical Clock Recovery with Fabry-Perot Cavity and Semiconductor Optical Amplifier

All-optical frequency multiplication/recovery based on the semiconductor optical amplifier ring cavity

A Novel Technology to Reduce the Pattern Effect in All-Optical Clock Recovery Using Injected Mode-Locked Laser Based on Soa

Optical Clock Recovery and 3R Regeneration for 10-Gb/s NRZ Signal to Achieve 10 000-hop Cascadability and 1 000 000-km Transmission

Novel approach to reduce the pattern effect in 10-Gb/s clock recovery

Optoelectrical Clock Recovery with Dispersion Monitoring for High Speed Transmission

Comb-like Filter Preprocessing to Reduce the Pattern Effect in the Clock Recovery Based on SOA