Abstract:We demonstrate 40 Gb/s all-optical clock recovery by using a monolithic integrated amplified-feedback laser (AFL) with coherent injection-locked method. The AFL consists of a gain-coupled DFB laser and an optical amplified feedback external cavity. With proper design and operation of AFL, the device can work at self-pulsation state that resulted from the beating between two lasing modes. The self-pulsation can be injection-locked to the optical clock embedded in input data streams. Due to different work mechanisms, there are two all-optical clock recovery operation modes: incoherent injection-locked and coherent injection-locked. It's predicted that the coherent injection method has various advantages: 1) requiring low injection power recovery, 2) independent of the bit rate and 3) introducing little timing jitter to the recovered clock. The robustness of coherent clock recovery is confirmed by our experimental results. We set up a return-to-zero (RZ) pseudorandom binary sequence (PRBS) data streams all-optical clock recovery system. This coherent injection-locked based clock recovery method is optical signal noise ratio (OSNR) and chromatic dispersion (CD) degeneration tolerant, and has low timing jitter and high sensitivity.

40Gbits/s All-Optical Clock Recovery for Degraded Signals Using an Amplified Feedback Laser

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

100 Gb/s All-Optical Clock Recovery Based on a Monolithic Dual-Mode DBR Laser

All-Optical, Bit-Rate Tunable Clock Recovery For Nrz-Ask Signals

Low-timing-jitter all-optical clock recovery for 40 Gbits/s RZ-DPSK and NRZ-DPSK signals using a passively mode-locked quantum-dot Fabry-Perot semiconductor laser

All-Optical Clock Recovery of 20 Gbit/S Nrz-Dpsk Signals Using Polarization-Maintaining Fiber Loop Mirror Filter and Semiconductor Optical Amplifier Fiber Ring Laser

All-Optical Clock Recovery for 20 Gb/s Using an Amplified Feedback DFB Laser

All-optical 20 Gbit/s NRZ-DPSK demodulation and clock recovery

Optical clock recovery with dual-wavelength output from degraded RZ and NRZ signals

All-optical NRZ-DPSK Clock Recovery Using Chromatic Dispersion Induced Clock Tone

All-optical NRZ-DPSK Clock Recovery Using Linearly Chirped Fiber Bragg Grating Induced Clock Tone

All-Optical Clock Recovery Using a Single Fabry–Perot Semiconductor Optical Amplifier

40 GHz All-Optical Clock Recovery Using Cross-Absorption in an Electro-Absorption Modulator Inside a Fiber Ring Laser

All-Optical Clock Recovery from Non-Return to Zero Data Stream Based on Semiconductor Optical Amplifier and Stimulated Brillouin Scattering

All-Optical Clock Recovery From 40 Gbit/S Rz Signal Based On Microring Resonators

All Optical Clock Recovery from Degraded Non-Return-to-Zero Data Stream

All-optical clock recovery using a ridge width varied two-section partly gain-coupled DFB self-pulsation laser

All-Optical Clock Recovery from Nrz-Dpsk Signals at Flexible Bit Rates

40‐Gb/s All‐optical 3R Regeneration Based on AFL and SOA‐DI

Multiwavelength All-Optical Clock Recovery of Non-Return-To-Zero Data

Single and Multiwavelength All-Optical Clock Recovery Using Fabry-Perot Semiconductor Optical Amplifier