Abstract:We demonstrate 40 Gb/s all-optical clock recovery by using a monolithic integrated amplified-feedback laser (AFL) with coherent injection-locked method. The AFL consists of a gain-coupled DFB laser and an optical amplified feedback external cavity. With proper design and operation of AFL, the device can work at self-pulsation state that resulted from the beating between two lasing modes. The self-pulsation can be injection-locked to the optical clock embedded in input data streams. Due to different work mechanisms, there are two all-optical clock recovery operation modes: incoherent injection-locked and coherent injection-locked. It's predicted that the coherent injection method has various advantages: 1) requiring low injection power recovery, 2) independent of the bit rate and 3) introducing little timing jitter to the recovered clock. The robustness of coherent clock recovery is confirmed by our experimental results. We set up a return-to-zero (RZ) pseudorandom binary sequence (PRBS) data streams all-optical clock recovery system. This coherent injection-locked based clock recovery method is optical signal noise ratio (OSNR) and chromatic dispersion (CD) degeneration tolerant, and has low timing jitter and high sensitivity.

Optical clock recovery with dual-wavelength output from degraded RZ and NRZ signals

All-Optical, Bit-Rate Tunable Clock Recovery For Nrz-Ask Signals

A novel approach for clock recovery without pattern effect from degraded signal

Low-Phase-Noise Clock Recovery from NRZ Signal and Simultaneous NRZ-to-RZ Format Conversion

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

40Gbits/s All-Optical Clock Recovery for Degraded Signals Using an Amplified Feedback Laser

100 Gb/s All-Optical Clock Recovery Based on a Monolithic Dual-Mode DBR Laser

Experimental Demonstration Of An All-Optical Clock And Data Recovery Technology For 10 Gb/S Nrz-Dpsk Signals

Low-timing-jitter all-optical clock recovery for 40 Gbits/s RZ-DPSK and NRZ-DPSK signals using a passively mode-locked quantum-dot Fabry-Perot semiconductor laser

Dual-wavelength clock recovery with simultaneous fourfold demultiplexing using an optoelectronic oscillator

All-Optical Clock Recovery From 40 Gbit/S Rz Signal Based On Microring Resonators

100-GHz wavelength-tunable all-optical clock recovery with Fabry-Perot filter and semiconductor optical amplifier

Effective Optical Clock Recovery and Simultaneous Fourfold Demultiplexing of Otdm Signal Using an Optoelectonic Oscillator

All-optical Subharmonic Clock Recovery Using an Injected Mode-locked Fiber Ring Laser

100-Ghz All-Optical Clock Recovery with Fabry-Perot Cavity and Semiconductor Optical Amplifier

All-optical clock recovery using a ridge width varied two-section partly gain-coupled DFB self-pulsation laser

Optical Clock Recovery and 3R Regeneration for 10-Gb/s NRZ Signal to Achieve 10 000-hop Cascadability and 1 000 000-km Transmission

Clock recovery from degraded signals at high repetition rates using a two-ring injection mode-locked fiber ring laser

Optimizing Clock Enhancement to Achieve Modulation-Format-Independent All-Optical Clock Recovery

All-optical Clock Recovery Using Parallel Ridge-Width Varied DFB Lasers Integrated with Y-branch Waveguide Coupler

Clock Recovery for OTDM and 3R Regeneration