Abstract:We demonstrate 40 Gb/s all-optical clock recovery by using a monolithic integrated amplified-feedback laser (AFL) with coherent injection-locked method. The AFL consists of a gain-coupled DFB laser and an optical amplified feedback external cavity. With proper design and operation of AFL, the device can work at self-pulsation state that resulted from the beating between two lasing modes. The self-pulsation can be injection-locked to the optical clock embedded in input data streams. Due to different work mechanisms, there are two all-optical clock recovery operation modes: incoherent injection-locked and coherent injection-locked. It's predicted that the coherent injection method has various advantages: 1) requiring low injection power recovery, 2) independent of the bit rate and 3) introducing little timing jitter to the recovered clock. The robustness of coherent clock recovery is confirmed by our experimental results. We set up a return-to-zero (RZ) pseudorandom binary sequence (PRBS) data streams all-optical clock recovery system. This coherent injection-locked based clock recovery method is optical signal noise ratio (OSNR) and chromatic dispersion (CD) degeneration tolerant, and has low timing jitter and high sensitivity.

Dual-wavelength clock recovery with simultaneous fourfold demultiplexing using an optoelectronic oscillator

Gaussian-Like Dual-Wavelength Prescaled Clock Recovery with Simultaneous Frequency-Doubled Clock Recovery Using an Optoelectronic Oscillator

Effective Optical Clock Recovery and Simultaneous Fourfold Demultiplexing of Otdm Signal Using an Optoelectonic Oscillator

Time-lens Based Optoelectronic Oscillator for Simultaneous Clock Recovery and Demultiplexing of OTDM Signal

Simultaneous Prescaled and Frequency-Doubled Clock Recovery Using an Injection-Locked Optoelectronic Oscillator

Optoelectrical Clock Recovery with Dispersion Monitoring for High Speed Transmission

Optical clock recovery with dual-wavelength output from degraded RZ and NRZ signals

All Optical Clock Extraction and Demultiplexing in 4×10 GHz OTDM System

Simultaneous Clock Recovery and Polarization De-multiplexing for 160-Gbit/s PolM-NRZ-DQPSK Using Electro-Optical Phase-Locked Loop

100 Gb/s All-Optical Clock Recovery Based on a Monolithic Dual-Mode DBR Laser

A Novel All-Optical Clock Recovery Experiment for Extracting Clock Signal from OTDM Signal

Clock Recovery for OTDM and 3R Regeneration

100-GHz wavelength-tunable all-optical clock recovery with Fabry-Perot filter and semiconductor optical amplifier

All Optical Clock Extraction And Demultiplexing In 4x10ghz Otdm System

40 Gb/s Clock Recovery Based on Optical Phase-Locked Loop

All-optical Clock Recovery Using Parallel Ridge-Width Varied DFB Lasers Integrated with Y-branch Waveguide Coupler

All-optical Subharmonic Clock Recovery Using an Injected Mode-locked Fiber Ring Laser

All-optical clock recovery using a ridge width varied two-section partly gain-coupled DFB self-pulsation laser

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

Low-Phase-Noise Clock Recovery from NRZ Signal and Simultaneous NRZ-to-RZ Format Conversion

100-Ghz All-Optical Clock Recovery with Fabry-Perot Cavity and Semiconductor Optical Amplifier