Abstract:The ongoing growth of data traffic from existing and new latency-sensitive applications poses a challenge to the data center network. Wavelength-routed optical circuit switching promises high bandwidth, low power and latency networking for data centers, but requires a wideband wavelength tunable source capable of nanosecond-scale hitless wavelength switching at every node. A tunable source based on DFB laser arrays is a potential candidate due to the high-speed dynamic property and high single-longitudinal-mode (SLM) stability of the DFB laser. However, the large-scale integration of the DFB laser and the high precision control of the lasing wavelength are still problems. In this work, we proposed and fabricated a monolithic integrated 16-channel DFB laser array with high SLM stability and 100-GHz channel spacing by using the reconstruction-equivalent-chirp (REC) technique. The maximum output power of each channel was above 6 mW. Based on the custom-designed fast switching drive board with a field-programmable gate array (FPGA), the switch-ON and OFF time between any pair of channel combinations were measured at less than 10 ns. Dynamic switching wavelengths remained stable and resided within the receiver bandwidth. Wavelength switching experiments for modulated light signals were done by driving the external modulator, achieving bit error performance at 1 x 10(-9) for 10 Gb/s NRZ data.

Amplified Feedback DFB Laser for 40gb/s All-Optical Clock Recovery

Amplified feedback DFB laser for 40 Gb/s all-optical clock recovery

All-Optical Clock Recovery for 20 Gb/s Using an Amplified Feedback DFB Laser

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

40‐Gb/s All‐optical 3R Regeneration Based on AFL and SOA‐DI

Integrated Dual-DFB Laser for 408 GHz Carrier Generation Enabling 131 Gbit/s Wireless Transmission over 10.7 Meters.

200 Gb/s Optical-Amplifier-Free IM/DD Transmissions Using a Directly Modulated O-Band DFB+R Laser Targeting LR Applications

All-optical clock recovery using a ridge width varied two-section partly gain-coupled DFB self-pulsation laser

40Gbits/s All-Optical Clock Recovery for Degraded Signals Using an Amplified Feedback Laser

100 Gb/s All-Optical Clock Recovery Based on a Monolithic Dual-Mode DBR Laser

All-optical Clock Recovery Using Parallel Ridge-Width Varied DFB Lasers Integrated with Y-branch Waveguide Coupler

40 GHz All-Optical Clock Recovery Using Cross-Absorption in an Electro-Absorption Modulator Inside a Fiber Ring Laser

Widely Tunable Monolithic Dual-Mode Laser for W-band Photonic Millimeter-Wave Generation and All-Optical Clock Recovery.

40-Gb/s all-optical 3R regeneration with semiconductor devices

Influence Factors of an All-Optical Recovered Clock from Two-Section Dfb Lasers

Optical Circuit Switching Using REC-DFB Laser Array

All-Optical Clock Recovery from Non-Return to Zero Data Stream Based on Semiconductor Optical Amplifier and Stimulated Brillouin Scattering

40 Gb/s Clock Recovery Based on Optical Phase-Locked Loop

All-Optical, Bit-Rate Tunable Clock Recovery For Nrz-Ask Signals

Study on High-Speed All-Optical Clock Extraction Using an Amplified Feedback Laser