Abstract:We demonstrate 40 Gb/s all-optical clock recovery by using a monolithic integrated amplified-feedback laser (AFL) with coherent injection-locked method. The AFL consists of a gain-coupled DFB laser and an optical amplified feedback external cavity. With proper design and operation of AFL, the device can work at self-pulsation state that resulted from the beating between two lasing modes. The self-pulsation can be injection-locked to the optical clock embedded in input data streams. Due to different work mechanisms, there are two all-optical clock recovery operation modes: incoherent injection-locked and coherent injection-locked. It's predicted that the coherent injection method has various advantages: 1) requiring low injection power recovery, 2) independent of the bit rate and 3) introducing little timing jitter to the recovered clock. The robustness of coherent clock recovery is confirmed by our experimental results. We set up a return-to-zero (RZ) pseudorandom binary sequence (PRBS) data streams all-optical clock recovery system. This coherent injection-locked based clock recovery method is optical signal noise ratio (OSNR) and chromatic dispersion (CD) degeneration tolerant, and has low timing jitter and high sensitivity.

Widely Tunable Monolithic Dual-Mode Laser for W-band Photonic Millimeter-Wave Generation and All-Optical Clock Recovery.

All-optical Clock Recovery Using Parallel Ridge-Width Varied DFB Lasers Integrated with Y-branch Waveguide Coupler

Photonic Generation of Ultrawideband Monocycle and Doublet Pulses by Using a Semiconductor-Optical-amplifier-based Wavelength Converter.

100 Gb/s All-Optical Clock Recovery Based on a Monolithic Dual-Mode DBR Laser

All-Optical Clock Recovery for 20 Gb/s Using an Amplified Feedback DFB Laser

All-optical clock recovery using a ridge width varied two-section partly gain-coupled DFB self-pulsation laser

Dual Wavelength Slot Coupled Fabry-Perot Semiconductor Laser

Amplified feedback DFB laser for 40 Gb/s all-optical clock recovery

Amplified Feedback DFB Laser for 40gb/s All-Optical Clock Recovery

Photonic generation of tunable wideband dual-chirp microwave waveforms using a monolithic integrated three-section laser

Tunable V-Coupled-Cavity Semiconductor Laser Monolithically Integrated with Monitoring Photodiodes Using Deeply Etched Reflective Trenches

16×100GHz digitally wavelength switchable V-coupled-cavity laser with 40dB SMSR

Simple and Compact V-cavity Semiconductor Laser with 50×100 GHz Wavelength Tuning.

Widely Wavelength Switchable V-Coupled-Cavity Semiconductor Laser With Similar To 40 Db Side-Mode Suppression Ratio

Fiber-Integrated Reversibly Wavelength-Tunable Nanowire Laser Based on Nanocavity Mode Coupling.

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

40Gbits/s All-Optical Clock Recovery for Degraded Signals Using an Amplified Feedback Laser

Influence Factors of an All-Optical Recovered Clock from Two-Section Dfb Lasers

Stable Dual-Wavelength DFB Fiber Laser With Separate Resonant Cavities and Its Application in Tunable Microwave Generation

A Highly Integrated Single-Mode 1064 Nm Laser with 8.5 Khz Linewidth for Dual-Wavelength Active Optical Clock.

100-GHz wavelength-tunable all-optical clock recovery with Fabry-Perot filter and semiconductor optical amplifier